| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "arm64: zynqmp: Add an OP-TEE node to the device tree"
This reverts commit 06d22ed6b6635b17551f386b50bb5aaff9b75fbe.
OP-TEE logic in U-Boot automatically injects a reserved-memory
node along with optee firmware node to kernel device tree.
The injection logic is dependent on that there is no manually
defined optee node. Having the node in zynqmp.dtsi effectively
breaks OP-TEE's insertion of the reserved-memory node, causing
memory access violations during runtime. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: clear initialized flag for deinit-ed srng lists
In a number of cases we see kernel panics on resume due
to ath11k kernel page fault, which happens under the
following circumstances:
1) First ath11k_hal_dump_srng_stats() call
Last interrupt received for each group:
ath11k_pci 0000:01:00.0: group_id 0 22511ms before
ath11k_pci 0000:01:00.0: group_id 1 14440788ms before
[..]
ath11k_pci 0000:01:00.0: failed to receive control response completion, polling..
ath11k_pci 0000:01:00.0: Service connect timeout
ath11k_pci 0000:01:00.0: failed to connect to HTT: -110
ath11k_pci 0000:01:00.0: failed to start core: -110
ath11k_pci 0000:01:00.0: firmware crashed: MHI_CB_EE_RDDM
ath11k_pci 0000:01:00.0: already resetting count 2
ath11k_pci 0000:01:00.0: failed to wait wlan mode request (mode 4): -110
ath11k_pci 0000:01:00.0: qmi failed to send wlan mode off: -110
ath11k_pci 0000:01:00.0: failed to reconfigure driver on crash recovery
[..]
2) At this point reconfiguration fails (we have 2 resets) and
ath11k_core_reconfigure_on_crash() calls ath11k_hal_srng_deinit()
which destroys srng lists. However, it does not reset per-list
->initialized flag.
3) Second ath11k_hal_dump_srng_stats() call sees stale ->initialized
flag and attempts to dump srng stats:
Last interrupt received for each group:
ath11k_pci 0000:01:00.0: group_id 0 66785ms before
ath11k_pci 0000:01:00.0: group_id 1 14485062ms before
ath11k_pci 0000:01:00.0: group_id 2 14485062ms before
ath11k_pci 0000:01:00.0: group_id 3 14485062ms before
ath11k_pci 0000:01:00.0: group_id 4 14780845ms before
ath11k_pci 0000:01:00.0: group_id 5 14780845ms before
ath11k_pci 0000:01:00.0: group_id 6 14485062ms before
ath11k_pci 0000:01:00.0: group_id 7 66814ms before
ath11k_pci 0000:01:00.0: group_id 8 68997ms before
ath11k_pci 0000:01:00.0: group_id 9 67588ms before
ath11k_pci 0000:01:00.0: group_id 10 69511ms before
BUG: unable to handle page fault for address: ffffa007404eb010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 10022d067 PMD 100b01067 PTE 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k]
Call Trace:
<TASK>
? __die_body+0xae/0xb0
? page_fault_oops+0x381/0x3e0
? exc_page_fault+0x69/0xa0
? asm_exc_page_fault+0x22/0x30
? ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k (HASH:6cea 4)]
ath11k_qmi_driver_event_work+0xbd/0x1050 [ath11k (HASH:6cea 4)]
worker_thread+0x389/0x930
kthread+0x149/0x170
Clear per-list ->initialized flag in ath11k_hal_srng_deinit(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: properly reset Rx ring descriptor
When device reset is triggered by feature changes such as toggling Rx
VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The
hardware descriptor ring may retain stale values from previous sessions.
And only set the length to 0 in rx_desc[0] would result in building
malformed SKBs. Fix it to ensure a clean slate after device reset.
[ 549.186435] [ C16] ------------[ cut here ]------------
[ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814!
[ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary)
[ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510
[ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8
[ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282
[ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2
[ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40
[ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e
[ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200
[ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2
[ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000
[ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0
[ 549.186505] [ C16] PKRU: 55555554
[ 549.186507] [ C16] Call Trace:
[ 549.186510] [ C16] <IRQ>
[ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186517] [ C16] __skb_pad+0xc7/0xf0
[ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx]
[ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx]
[ 549.186540] [ C16] __napi_poll+0x28/0x190
[ 549.186544] [ C16] net_rx_action+0x301/0x3f0
[ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50
[ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160
[ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0
[ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130
[ 549.186572] [ C16] common_interrupt+0xb8/0xd0
[ 549.186576] [ C16] </IRQ>
[ 549.186577] [ C16] <TASK>
[ 549.186579] [ C16] asm_common_interrupt+0x22/0x40
[ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246
[ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000
[ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3
[ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000
[ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40
[ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000
[ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420
[ 549.186605] [ C16] cpuidle_en
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SEV firmware docs for SNP_VLEK_LOAD note:
> On SNP_SHUTDOWN, the VLEK is deleted.
That is, the initialization/shutdown wrapper here is pointless, because the
firmware immediately throws away the key anyway. Instead, refuse to do
anything if SNP has not been previously initialized.
This is an ABI break: before, this was a no-op and almost certainly a
mistake by userspace, and now it returns -ENODEV. ABI compatibility could be
maintained here by simply returning 0 in the check instead. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for SEV ioctls
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
sev_move_to_init_state() is called for ioctls requiring only SEV firmware:
SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and
SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on
the SEV firmware. Since these commands do not require SNP to be
initialized, skip it by calling __sev_platform_init_locked() which only
initializes the SEV firmware. This way SNP is not Initialized at all, and
HSAVE_PA is not cleared.
The previous code saved any SEV initialization firmware error to
init_args.error and then threw it away and hardcoded the return value of
INVALID_PLATFORM_STATE regardless of the real firmware error. This patch
changes it to surface the underlying error, which is hopefully both more
useful and doesn't cause any problems.
Note that it is still safe to call __sev_firmware_shutdown() directly: it
calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: set tx buffer type for SMD frames
Sashiko pointed out that igc_fpe_init_smd_frame() initializes
igc_tx_buffer fields for an SMD skb, but does not set the buffer type:
https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp
Since igc_tx_buffer entries are reused, a stale XDP or XSK type can
remain and make TX completion use the wrong cleanup path.
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix read_dev_clk_lock spinlock init in idpf_ptp_init()
In idpf_ptp_init(), read_dev_clk_lock is initialized after
ptp_schedule_worker() had already been called (and after
idpf_ptp_settime64() could reach the lock). The PTP aux worker
fires immediately upon scheduling and can call into
idpf_ptp_read_src_clk_reg_direct(), which takes
spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering
the lockdep "non-static key" warning:
[12973.796587] idpf 0000:83:00.0: Device HW Reset initiated
[12974.094507] INFO: trying to register non-static key.
...
[12974.097208] Call Trace:
[12974.097213] <TASK>
[12974.097218] dump_stack_lvl+0x93/0xe0
[12974.097234] register_lock_class+0x4c4/0x4e0
[12974.097249] ? __lock_acquire+0x427/0x2290
[12974.097259] __lock_acquire+0x98/0x2290
[12974.097272] lock_acquire+0xc6/0x310
[12974.097281] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097311] ? lockdep_hardirqs_on_prepare+0xde/0x190
[12974.097318] ? finish_task_switch.isra.0+0xd2/0x350
[12974.097330] ? __pfx_ptp_aux_kworker+0x10/0x10 [ptp]
[12974.097343] _raw_spin_lock+0x30/0x40
[12974.097353] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097373] idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097391] ? kthread_worker_fn+0x88/0x3d0
[12974.097404] ? kthread_worker_fn+0x4e/0x3d0
[12974.097411] idpf_ptp_update_cached_phctime+0x26/0x120 [idpf]
[12974.097428] ? _raw_spin_unlock_irq+0x28/0x50
[12974.097436] idpf_ptp_do_aux_work+0x15/0x20 [idpf]
[12974.097454] ptp_aux_kworker+0x20/0x40 [ptp]
[12974.097464] kthread_worker_fn+0xd5/0x3d0
[12974.097474] ? __pfx_kthread_worker_fn+0x10/0x10
[12974.097482] kthread+0xf4/0x130
[12974.097489] ? __pfx_kthread+0x10/0x10
[12974.097498] ret_from_fork+0x32c/0x410
[12974.097512] ? __pfx_kthread+0x10/0x10
[12974.097519] ret_from_fork_asm+0x1a/0x30
[12974.097540] </TASK>
Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock
is not touched before it's been initialized. |
| sshd in OpenSSH before 10.4 has an undocumented security-relevant behavior: GSSAPIStrictAcceptorCheck has no value if the server is in Windows Active Directory. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: clear skb->dev before running a sockmap verdict
On the UDP receive path skb->dev is repurposed as dev_scratch (the
truesize/state cache set by udp_set_dev_scratch()), through the
union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff.
When a UDP socket is in a sockmap, sk_data_ready is
sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor()
(sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq.
If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp,
bpf_skc_lookup_tcp), bpf_skc_lookup() does:
if (skb->dev)
caller_net = dev_net(skb->dev);
skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net()
dereferences it as a struct net_device * and the kernel takes a general
protection fault on a non-canonical address in softirq:
Oops: general protection fault, probably for non-canonical address 0x1010000800004a0
CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full)
RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline]
RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047
Call Trace:
<IRQ>
bpf_prog_4675cb904b7071f8+0x12e/0x14e
bpf_prog_run_pin_on_cpu+0xc6/0x1f0
sk_psock_verdict_recv+0x1ba/0x350
udp_read_skb+0x31a/0x370
sk_psock_verdict_data_ready+0x2e3/0x600
__udp_enqueue_schedule_skb+0x4c8/0x650
udpv6_queue_rcv_one_skb+0x3ec/0x740
udp6_unicast_rcv_skb+0x11d/0x140
ip6_protocol_deliver_rcu+0x61e/0x950
ip6_input_finish+0xa9/0x150
NF_HOOK+0x286/0x2f0
ip6_input+0x117/0x220
NF_HOOK+0x286/0x2f0
__netif_receive_skb+0x85/0x200
process_backlog+0x374/0x9a0
__napi_poll+0x4f/0x1c0
net_rx_action+0x3b0/0x770
handle_softirqs+0x15a/0x460
do_softirq+0x57/0x80
</IRQ>
The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on
dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear
skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which
skb_set_owner_sk_safe() set just above. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: zero per-item info buffer before handing it to visitors
rds_for_each_conn_info() and rds_walk_conn_path_info() both hand a
caller-allocated on-stack u64 buffer to a per-connection visitor and
then copy the full item_len bytes back to user space via
rds_info_copy() regardless of how much of the buffer the visitor
actually wrote.
rds_ib_conn_info_visitor() and rds6_ib_conn_info_visitor() only
write a subset of their output struct when the underlying
rds_connection is not in state RDS_CONN_UP (src/dst addr, tos, sl
and the two GIDs via explicit memsets). Several u32 fields
(max_send_wr, max_recv_wr, max_send_sge, rdma_mr_max, rdma_mr_size,
cache_allocs) and the 2-byte alignment hole between sl and
cache_allocs remain as whatever stack contents preceded the visitor
call and are then memcpy_to_user()'d out to user space.
struct rds_info_rdma_connection and struct rds6_info_rdma_connection
are the only rds_info_* structs in include/uapi/linux/rds.h that are
not marked __attribute__((packed)), so they have a real alignment
hole. The other info visitors (rds_conn_info_visitor,
rds6_conn_info_visitor, rds_tcp_tc_info, ...) write all fields of
their packed output struct today and are not known to be vulnerable,
but a future visitor that adds a conditional write-path would have
the same bug.
Reproduction on a kernel built without CONFIG_INIT_STACK_ALL_ZERO=y:
a local unprivileged user opens AF_RDS, sets SO_RDS_TRANSPORT=IB,
binds to a local address on an RDMA-capable netdev (rxe soft-RoCE on
any netdev is sufficient), sendto()'s any peer on the same subnet
(fails cleanly but installs an rds_connection in the global hash in
RDS_CONN_CONNECTING), then calls getsockopt(SOL_RDS,
RDS_INFO_IB_CONNECTIONS). The returned 68-byte item contains 26
bytes of stack garbage including kernel text/data pointers:
0..7 0a 63 00 01 0a 63 00 02 src=10.99.0.1 dst=10.99.0.2
8..39 00 ... gids (memset-zeroed)
40..47 e0 92 a3 81 ff ff ff ff kernel pointer (max_send_wr)
48..55 7f 37 b5 81 ff ff ff ff kernel pointer (rdma_mr_max)
56..59 01 00 08 00 rdma_mr_size (garbage)
60..61 00 00 tos, sl
62..63 00 00 alignment padding
64..67 18 00 00 00 cache_allocs (garbage)
Fix by zeroing the per-item buffer in both rds_for_each_conn_info()
and rds_walk_conn_path_info() before invoking the visitor. This
covers the IPv4/IPv6 IB visitors and hardens all current and future
visitors against the same class of bug.
No functional change for visitors that fully populate their output.
Changes in v2:
- retarget at the net tree (subject prefix "[PATCH net v2]",
net/rds: prefix in the title)
- pick up Reviewed-by tags from Sharath Srinivasan and
Allison Henderson |
| In the Linux kernel, the following vulnerability has been resolved:
arm_mpam: Check whether the config array is allocated before destroying it
__destroy_component_cfg() is called to free the configuration array.
It uses the embedded 'garbage' structure, which means the array has
to be allocated.
If __destroy_component_cfg() is called from mpam_disable() before the
configuration was ever allocated, then a NULL pointer is dereferenced.
Check for this case and return early if the configuration is not
allocated.
__destroy_component_cfg() also frees the mbwu_state as this is allocated
by __allocate_component_cfg(). As the mbwu_state is allocated after
comp->cfg is set, and is also under mpam_list_lock, only the first
pointer needs checking. |
| In the Linux kernel, the following vulnerability has been resolved:
tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
In the SIOCGIFHWADDR path, tap_ioctl() copies 16 bytes of an
uninitialised on-stack struct sockaddr_storage to userspace via
ifr_hwaddr, but netif_get_mac_address() only writes sa_family and
dev->addr_len (6 for Ethernet) bytes, leaving sa_data[6..13] uninitialised.
Those 8 trailing bytes leak kernel stack contents; SIOCGIFHWADDR on a
macvtap chardev returns kernel .text and direct-map pointers, defeating
KASLR.
Initialise ss at declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
tun: zero the whole vnet header in tun_put_user()
tun_put_user() declares an on-stack struct virtio_net_hdr_v1_hash_tunnel
without zeroing it. For a non-tunnel skb, virtio_net_hdr_tnl_from_skb()
only initializes the first 10 bytes (sizeof(struct virtio_net_hdr)),
leaving bytes 10..23 (num_buffers and the hash/tunnel fields) as stack
garbage.
An unprivileged user can set the vnet header size to 24 with
TUNSETVNETHDRSZ, so __tun_vnet_hdr_put() copies all 24 bytes of the
partially-initialized struct to userspace, leaking 14 bytes of kernel
stack on every read of a non-tunnel packet.
Fix it the same way tun_get_user() already does by zeroing the whole
header right after declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: clear page->private in free_pages_prepare()
Several subsystems (slub, shmem, ttm, etc.) use page->private but don't
clear it before freeing pages. When these pages are later allocated as
high-order pages and split via split_page(), tail pages retain stale
page->private values.
This causes a use-after-free in the swap subsystem. The swap code uses
page->private to track swap count continuations, assuming freshly
allocated pages have page->private == 0. When stale values are present,
swap_count_continued() incorrectly assumes the continuation list is valid
and iterates over uninitialized page->lru containing LIST_POISON values,
causing a crash:
KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107]
RIP: 0010:__do_sys_swapoff+0x1151/0x1860
Fix this by clearing page->private in free_pages_prepare(), ensuring all
freed pages have clean state regardless of previous use. |
| In the Linux kernel, the following vulnerability has been resolved:
net: af_key: zero aligned sockaddr tail in PF_KEY exports
PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr
payload space, so IPv6 addresses occupy 32 bytes on the wire. However,
`pfkey_sockaddr_fill()` initializes only the first 28 bytes of
`struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized.
Not every PF_KEY message is affected. The state and policy dump builders
already zero the whole message buffer before filling the sockaddr
payloads. Keep the fix to the export paths that still append aligned
sockaddr payloads with plain `skb_put()`:
- `SADB_ACQUIRE`
- `SADB_X_NAT_T_NEW_MAPPING`
- `SADB_X_MIGRATE`
Fix those paths by clearing only the aligned sockaddr tail after
`pfkey_sockaddr_fill()`. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/cdx: Fix NULL pointer dereference in interrupt trigger path
Add validation to ensure MSI is configured before accessing cdx_irqs
array in vfio_cdx_set_msi_trigger(). Without this check, userspace
can trigger a NULL pointer dereference by calling VFIO_DEVICE_SET_IRQS
with VFIO_IRQ_SET_DATA_BOOL or VFIO_IRQ_SET_DATA_NONE flags before
ever setting up interrupts via VFIO_IRQ_SET_DATA_EVENTFD.
The vfio_cdx_msi_enable() function allocates the cdx_irqs array and
sets config_msi to 1 only when called through the EVENTFD path. The
trigger loop (for DATA_BOOL/DATA_NONE) assumed this had already been
done, but there was no enforcement of this call ordering.
This matches the protection used in the PCI VFIO driver where
vfio_pci_set_msi_trigger() checks irq_is() before the trigger loop. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: mprls0025pa: fix spi_transfer struct initialisation
Make sure that the spi_transfer struct is zeroed out before use. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Clear VRAM on allocation to prevent stale data exposure
KFD VRAM allocations set AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE
but not AMDGPU_GEM_CREATE_VRAM_CLEARED, leaving freshly allocated
VRAM with stale data from prior use observable by compute kernels.
The GEM ioctl path already sets VRAM_CLEARED for all userspace
allocations via amdgpu_gem_create_ioctl() and
amdgpu_mode_dumb_create(). The KFD path was missing this flag,
allowing stale page table remnants to leak into user buffers.
This causes crashes in RCCL P2P transport where non-zero data in
ptrExchange/head/tail fields corrupts the protocol handshake. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Fix PF driver crash with kexec kernel booting
During a kexec reboot the hardware is not power-cycled, so AF state from
the old kernel can persist into the new kernel. When AF and PF drivers
are built as modules, the PF driver may probe before AF reinitializes
the hardware.
The PF driver treats the RVUM block revision as an indication that AF
initialization is complete. If this value is left uncleared at shutdown,
PF may incorrectly assume AF is ready and access stale hardware state,
leading to a crash.
Clear the RVUM block revision during AF shutdown to avoid PF
mis-detecting AF readiness after kexec. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: clear waitid info before copying it to userspace
IORING_OP_WAITID stores its result fields in struct io_waitid::info and
later copies them to userspace siginfo. The prep path initializes the
request arguments, but it does not initialize info itself.
If the wait operation completes without reporting a child event, the common
wait code can return without writing wo_info. In that case io_waitid_finish()
still copies iw->info to userspace, exposing stale bytes from the reused
io_kiocb command storage.
Clear the result storage during prep so the io_uring path matches the
regular waitid syscall, which uses a zero-initialized struct waitid_info. |
