| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: fix for dma-fence safe access rules
Commit 506aa8b02a8d6 ("dma-fence: Add safe access helpers and document
the rules") details the dma-fence safe access rules. The most common
culprit is that drm_sched_fence_get_timeline_name may race with
group_free_queue. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
The struct pernet_operations docstring in include/net/net_namespace.h
explicitly warns against blocking RCU primitives in .exit handlers:
Exit methods using blocking RCU primitives, such as
synchronize_rcu(), should be implemented via exit_batch.
[...]
Please, avoid synchronize_rcu() at all, where it's possible.
Note that a combination of pre_exit() and exit() can
be used, since a synchronize_rcu() is guaranteed between
the calls.
xfrm_policy_fini() violates this: it calls synchronize_rcu() before
freeing the policy_bydst hash tables (so no RCU reader is mid-
traversal at free time), but runs from xfrm_net_ops.exit -- once per
namespace -- so a cleanup_net() of N namespaces pays N full RCU
grace periods serially.
Use the documented pre_exit/exit split. Move the policy flush (and
the workqueue drains it depends on) into a new .pre_exit handler;
xfrm_policy_fini() then runs in .exit and frees the hash tables
after the synchronize_rcu_expedited() that cleanup_net() guarantees
between the two phases. Providing O(1) RCU grace periods per batch
instead of O(N).
Observed on Linux 6.18 with a workload doing unshare(CLONE_NEWNET)
at ~13/sec sustained: cleanup_net() and the netns_wq rescuer kthread
both stuck in xfrm_policy_fini()'s synchronize_rcu(), >300k struct
net accumulated in the cleanup queue, Percpu in /proc/meminfo climbed
to 130+ GB on 256-CPU hosts, and memcg OOMs followed. setup_net and
__put_net counts were balanced, ruling out a refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Allow LPM map access from sleepable BPF programs
trie_lookup_elem() annotates its rcu_dereference_check() walks with
only rcu_read_lock_bh_held(). Because rcu_dereference_check(p, c)
resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI and
classic RCU readers but fails for sleepable BPF programs, which enter
via __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace().
trie_update_elem() and trie_delete_elem() have the same problem in a
different form: they walk the trie with plain rcu_dereference(), which
asserts rcu_read_lock_held() unconditionally. Both are reachable from
sleepable BPF programs via the bpf_map_update_elem / bpf_map_delete_elem
helpers, and from the syscall path under classic rcu_read_lock(). In
the writer paths the trie is actually protected by trie->lock (an
rqspinlock taken across the walk); we never relied on the RCU read-side
lock to keep nodes alive there.
A sleepable LSM hook that ends up touching an LPM trie therefore
triggers lockdep on debug kernels:
=============================
WARNING: suspicious RCU usage
7.1.0-... Tainted: G E
-----------------------------
kernel/bpf/lpm_trie.c:249 suspicious rcu_dereference_check() usage!
1 lock held by net_tests/540:
#0: (rcu_tasks_trace_srcu_struct){....}-{0:0},
at: __bpf_prog_enter_sleepable+0x26/0x280
Call Trace:
dump_stack_lvl
lockdep_rcu_suspicious
trie_lookup_elem
bpf_prog_..._enforce_security_socket_connect
bpf_trampoline_...
security_socket_connect
__sys_connect
do_syscall_64
This is lockdep-only -- no UAF, since Tasks Trace RCU does serialize
against the trie's reclaim path -- but it spams the console once per
distinct callsite on every debug kernel running a sleepable BPF LSM
that touches an LPM trie, which is increasingly common.
For the lookup path, switch the rcu_dereference_check() annotation
from rcu_read_lock_bh_held() to bpf_rcu_lock_held(), which accepts all
three contexts (classic, BH, Tasks Trace). Other map types already
follow this convention.
For trie_update_elem() and trie_delete_elem(), annotate the walks as
rcu_dereference_protected(*p, 1) -- matching trie_free() in the same
file -- since trie->lock is held across the walk. rqspinlock has no
lockdep_map, so the predicate degenerates to '1' rather than
lockdep_is_held(&trie->lock); the protection is real but not
machine-verifiable. trie_get_next_key() also uses bare
rcu_dereference() but is reachable only from the BPF syscall, which
holds classic rcu_read_lock() before dispatching, so it is left
untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Don't queue workqueue handlers to never-online CPUs
While an srcu_struct structure is in the midst of switching from CPU-0
to all-CPUs state, it can attempt to invoke callbacks for CPUs that
have never been online. Worse yet, it can attempt in invoke callbacks
for CPUs that never will be online, even including imaginary CPUs not in
cpu_possible_mask. This can cause hangs on s390, which is not set up to
deal with workqueue handlers being scheduled on such CPUs. This commit
therefore causes Tree SRCU to refrain from queueing workqueue handlers
on CPUs that have not yet (and might never) come online.
Because callbacks are not invoked on CPUs that have not been
online, it is an error to invoke call_srcu(), synchronize_srcu(), or
synchronize_srcu_expedited() on a CPU that is not yet fully online.
However, it turns out to be less code to redirect the callbacks
from too-early invocations of call_srcu() than to warn about such
invocations. This commit therefore also redirects callbacks queued on
not-yet-fully-online CPUs to the boot CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Drain pending requests at net namespace exit
The arguments to list_splice_init() in handshake_net_exit() are
reversed. The call moves the local empty "requests" list onto
hn->hn_requests, leaving the local list empty, so the subsequent
drain loop runs zero iterations. Pending handshake requests that
had not yet been accepted are not torn down when the net namespace
is destroyed; each one keeps a reference on a socket file and on
the handshake_req allocation.
Pass the source and destination in the documented order
(list_splice_init(list, head) moves list onto head) so the pending
list is transferred to the local scratch list and drained through
handshake_complete().
Fixing the splice direction exposes a list-corruption race. After
the splice each req->hr_list still has non-empty link pointers,
threading the stack-local scratch list rather than hn_requests.
A concurrent handshake_req_cancel() -- for example, from sunrpc's
TLS timeout on a kernel socket whose netns reference was not
taken -- finds the request through the rhashtable, calls
remove_pending(), and sees !list_empty(&req->hr_list).
__remove_pending_locked() then list_del_init()s an entry off the
scratch list while the drain iterates, corrupting it. The same
call arriving after the drain loop has run list_del() on an
entry hits LIST_POISON instead.
Have remove_pending() check HANDSHAKE_F_NET_DRAINING under
hn_lock and report not-found when drain is in progress. The
drain has already taken ownership; handshake_complete()'s existing
test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates
between drain and cancel for who calls the consumer's hp_done. Use
list_del_init() rather than list_del() in the drain so req->hr_list
does not carry LIST_POISON after drain releases the entry.
The DRAINING guard in remove_pending() makes cancel return false,
but cancel still falls through to test_and_set_bit on
HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference.
Without another pin, if that is the last reference, sk_destruct frees
the request while it is still linked on the drain loop's local list.
Pin each request's hr_file under hn_lock before releasing the list,
and drop that drain pin after the loop finishes with the request. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: add hook transactions for device deletions
Restore the flag that indicates that the hook is going away, ie.
NFT_HOOK_REMOVE, but add a new transaction object to track deletion
of hooks without altering the basechain/flowtable hook_list during
the preparation phase.
The existing approach that moves the hook from the basechain/flowtable
hook_list to transaction hook_list breaks netlink dump path readers
of this RCU-protected list.
It should be possible use an array for nft_trans_hook to store the
deleted hooks to compact the representation but I am not expecting
many hook object, specially now that wildcard support for devices
is in place.
Note that the nft_trans_chain_hooks() list contains a list of struct
nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while
this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE.
Note that new commands can be updated to use nft_trans_hook for
consistency.
This patch also adapts the event notification path to deal with the list
of hook transactions. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential for tearing in ->remote_i_size and ->zero_point
Fix potential tearing in using ->remote_i_size and ->zero_point by copying
i_size_read() and i_size_write() and using the same seqcount as for i_size.
We need to make sure that netfslib and the filesystems that use it always
hold i_lock whilst updating any of the sizes to prevent i_size_seqcount
from getting corrupted. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_inner: release local_lock before re-enabling softirqs
Quoting sashiko:
In the error path, local_bh_enable() is called before
local_unlock_nested_bh(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix incorrect FI_NO_EXTENT handling in __destroy_extent_node()
When __destroy_extent_node() sets the inode flag FI_NO_EXTENT, it does
not reset the length of the largest extent to 0 and update the inode
folio. Since modifications to the extent tree are disallowed afterward,
the cached largest extent may become stale. This can trigger the
following error in xfstests generic/388:
F2FS-fs (dm-0): sanity_check_extent_cache: inode (ino=1761) extent info [220057, 57, 6] is incorrect, run fsck to fix
In the f2fs_drop_inode path, __destroy_extent_node() does not need to
guarantee that et->node_cnt is 0, because concurrency with writeback
is expected in this path, and writeback may update the extent cache.
This patch reverts commit ed78aeebef05 ("f2fs: fix node_cnt race between
extent node destroy and writeback"), and remove the unnecessary zero
check of et->node_cnt. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rzv2h-ivc: Fix concurrent buffer list access
The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a
spinlock (`rzv2h_ivc::buffers.lock`). However, in
`rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the
`list_del()` call is executed without holding the spinlock, which makes
it possible for the list to be concurrently modified
Fix that by removing a buffer from the list in the lock protected section.
[assign ivc->buffers.curr in critical section as reported by Barnabas] |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
iptfs_consume_frags() transfers paged fragments from one socket buffer
to another but fails to propagate the SKBFL_SHARED_FRAG flag. This is
the same class of bug that was fixed in skb_try_coalesce() for
CVE-2026-46300: when fragments backed by read-only page-cache pages are
merged, the marker indicating their shared nature must be preserved so
that ESP can decide correctly whether in-place encryption is safe.
Apply the same two-line fix used in skb_try_coalesce() to
iptfs_consume_frags(). |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: disable BH before calling udp_tunnel_xmit_skb()
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
# ip net exec ha iperf3 -s
- without this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver
- with this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: 3ad: implement proper RCU rules for port->aggregator
syzbot found a data-race in bond_3ad_get_active_agg_info /
bond_3ad_state_machine_handler [1] which hints at lack of proper
RCU implementation.
Add __rcu qualifier to port->aggregator, and add proper RCU API.
[1]
BUG: KCSAN: data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handler
write to 0xffff88813cf5c4b0 of 8 bytes by task 36 on cpu 0:
ad_port_selection_logic drivers/net/bonding/bond_3ad.c:1659 [inline]
bond_3ad_state_machine_handler+0x9d5/0x2d60 drivers/net/bonding/bond_3ad.c:2569
process_one_work kernel/workqueue.c:3302 [inline]
process_scheduled_works+0x4f0/0x9c0 kernel/workqueue.c:3385
worker_thread+0x58a/0x780 kernel/workqueue.c:3466
kthread+0x22a/0x280 kernel/kthread.c:436
ret_from_fork+0x146/0x330 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
read to 0xffff88813cf5c4b0 of 8 bytes by task 22063 on cpu 1:
__bond_3ad_get_active_agg_info drivers/net/bonding/bond_3ad.c:2858 [inline]
bond_3ad_get_active_agg_info+0x8c/0x230 drivers/net/bonding/bond_3ad.c:2881
bond_fill_info+0xe0f/0x10f0 drivers/net/bonding/bond_netlink.c:853
rtnl_link_info_fill net/core/rtnetlink.c:906 [inline]
rtnl_link_fill+0x1d7/0x4e0 net/core/rtnetlink.c:927
rtnl_fill_ifinfo+0xf8e/0x1380 net/core/rtnetlink.c:2168
rtmsg_ifinfo_build_skb+0x11c/0x1b0 net/core/rtnetlink.c:4453
rtmsg_ifinfo_event net/core/rtnetlink.c:4486 [inline]
rtmsg_ifinfo+0x6d/0x110 net/core/rtnetlink.c:4495
__dev_notify_flags+0x76/0x390 net/core/dev.c:9790
netif_change_flags+0xac/0xd0 net/core/dev.c:9823
do_setlink+0x905/0x2950 net/core/rtnetlink.c:3180
rtnl_group_changelink net/core/rtnetlink.c:3813 [inline]
__rtnl_newlink net/core/rtnetlink.c:3981 [inline]
rtnl_newlink+0xf55/0x1400 net/core/rtnetlink.c:4109
rtnetlink_rcv_msg+0x64b/0x720 net/core/rtnetlink.c:6995
netlink_rcv_skb+0x123/0x220 net/netlink/af_netlink.c:2550
rtnetlink_rcv+0x1c/0x30 net/core/rtnetlink.c:7022
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x5a8/0x680 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x5c8/0x6f0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:787 [inline]
__sock_sendmsg net/socket.c:802 [inline]
____sys_sendmsg+0x563/0x5b0 net/socket.c:2698
___sys_sendmsg+0x195/0x1e0 net/socket.c:2752
__sys_sendmsg net/socket.c:2784 [inline]
__do_sys_sendmsg net/socket.c:2789 [inline]
__se_sys_sendmsg net/socket.c:2787 [inline]
__x64_sys_sendmsg+0xd4/0x160 net/socket.c:2787
x64_sys_call+0x194c/0x3020 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x12c/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x0000000000000000 -> 0xffff88813cf5c400
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 22063 Comm: syz.0.31122 Tainted: G W syzkaller #0 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: sync RX data at the hardware packet offset
mvpp2 programs the RX queue packet offset, so hardware writes received
data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at
dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the
unused headroom and misses the same number of bytes at the packet tail.
On non-coherent DMA systems this can leave the CPU reading stale cache
contents for the end of the received frame.
Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range
offset so the sync covers the Marvell header and packet data actually
written by hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use RCU-safe iteration in dev_map_redirect_multi() SKB path
The DEVMAP_HASH branch in dev_map_redirect_multi() uses
hlist_for_each_entry_safe() to iterate hash buckets, but this function
runs under RCU protection (called from xdp_do_generic_redirect_map()
in softirq context). Concurrent writers (__dev_map_hash_update_elem,
dev_map_hash_delete_elem) modify the list using RCU primitives
(hlist_add_head_rcu, hlist_del_rcu).
hlist_for_each_entry_safe() performs plain pointer dereferences without
rcu_dereference(), missing the acquire barrier needed to pair with
writers' rcu_assign_pointer(). On weakly-ordered architectures (ARM64,
POWER), a reader can observe a partially-constructed node. It also
defeats CONFIG_PROVE_RCU lockdep validation and KCSAN data-race
detection.
Replace with hlist_for_each_entry_rcu() using rcu_read_lock_bh_held()
as the lockdep condition, consistent with the rcu_dereference_check()
used in the DEVMAP (non-hash) branch of the same functions. Also fix
the same incorrect lockdep_is_held(&dtab->index_lock) condition in
dev_map_enqueue_multi(), where the lock is not held either. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: join hook list via splice_list_rcu() in commit phase
Publish new hooks in the list into the basechain/flowtable using
splice_list_rcu() to ensure netlink dump list traversal via rcu is safe
while concurrent ruleset update is going on. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: fix BQL imbalance in TX path
Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight
packets are accounted only for the AIROHA_NUM_TX_RING netdev TX
queues. The queue index is computed as:
qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx)
txq = netdev_get_tx_queue(dev, qid);
However, airoha_qdma_tx_napi_poll() accounts completions across all
netdev TX queues (num_tx_queues), leading to inconsistent BQL
accounting.
Also reset all netdev TX queues in the ndo_stop callback. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS
A logic flaw in __smc_setsockopt() allows a local unprivileged user to
cause a Denial of Service (DoS) by holding the socket lock indefinitely.
The function __smc_setsockopt() calls copy_from_sockptr() while holding
lock_sock(sk). By passing a userfaultfd-monitored memory page (or
FUSE-backed memory on systems where unprivileged userfaultfd is disabled)
as the optval, an attacker can halt execution during the copy operation,
keeping the lock held.
Combined with asynchronous tear-down operations like shutdown(), this
exhausts the kernel wq (kworkers) and triggers the hung task watchdog.
[ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds.
[ 240.123489] Call Trace:
[ 240.123501] smc_shutdown+...
[ 240.123512] lock_sock_nested+...
This patch moves the user-space copy outside the lock_sock() critical
section to prevent the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: reset per-IO canceled flag on each fetch
If a ublk server starts recovering devices but dies before issuing fetch
commands for all IOs, cancellation of the fetch commands that were
successfully issued may never complete. This is because the per-IO
canceled flag can remain set even after the fetch for that IO has been
submitted - the per-IO canceled flags for all IOs in a queue are reset
together only once all IOs for that queue have been fetched. So if a
nonempty proper subset of the IOs for a queue are fetched when the ublk
server dies, the IOs in that subset will never successfully be canceled,
as their canceled flags remain set, and this prevents ublk_cancel_cmd
from actually calling io_uring_cmd_done on the commands, despite the
fact that they are outstanding.
Fix this by resetting the per-IO cancel flags immediately when each IO
is fetched instead of waiting for all IOs for the queue (which may never
happen). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: jitterentropy - replace long-held spinlock with mutex
jent_kcapi_random() serializes the shared jitterentropy state, but it
currently holds a spinlock across the jent_read_entropy() call. That
path performs expensive jitter collection and SHA3 conditioning, so
parallel readers can trigger stalls as contending waiters spin for
the same lock.
To prevent non-preemptible lock hold, replace rng->jent_lock with a
mutex so contended readers sleep instead of spinning on a shared lock
held across expensive entropy generation. |
