| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OliveTin gives access to predefined shell commands from a web interface. From 3000.0.0 until 3000.17.0, the service/internal/auth/otoauth2/restapi_auth_oauth2.go OAuth2 login handler stores per-login state in the registeredStates map on every /oauth/login request without expiring, deleting, or bounding entries, allowing an unauthenticated attacker to exhaust memory and cause a denial of service. This issue is fixed in version 3000.17.0. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix reservation leak in some error paths when inserting inline extent
If we fail to allocate a path or join a transaction, we return from
__cow_file_range_inline() without freeing the reserved qgroup data,
resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data()
in such cases. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: fix leaked ct in error paths
There are some situations where ct might be leaked as error paths are
skipping the refcounted check and return immediately. In order to solve
it make sure that the check is always called. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix Rx page leak on multi-buffer frames
The ice_put_rx_mbuf() function handles calling ice_put_rx_buf() for each
buffer in the current frame. This function was introduced as part of
handling multi-buffer XDP support in the ice driver.
It works by iterating over the buffers from first_desc up to 1 plus the
total number of fragments in the frame, cached from before the XDP program
was executed.
If the hardware posts a descriptor with a size of 0, the logic used in
ice_put_rx_mbuf() breaks. Such descriptors get skipped and don't get added
as fragments in ice_add_xdp_frag. Since the buffer isn't counted as a
fragment, we do not iterate over it in ice_put_rx_mbuf(), and thus we don't
call ice_put_rx_buf().
Because we don't call ice_put_rx_buf(), we don't attempt to re-use the
page or free it. This leaves a stale page in the ring, as we don't
increment next_to_alloc.
The ice_reuse_rx_page() assumes that the next_to_alloc has been incremented
properly, and that it always points to a buffer with a NULL page. Since
this function doesn't check, it will happily recycle a page over the top
of the next_to_alloc buffer, losing track of the old page.
Note that this leak only occurs for multi-buffer frames. The
ice_put_rx_mbuf() function always handles at least one buffer, so a
single-buffer frame will always get handled correctly. It is not clear
precisely why the hardware hands us descriptors with a size of 0 sometimes,
but it happens somewhat regularly with "jumbo frames" used by 9K MTU.
To fix ice_put_rx_mbuf(), we need to make sure to call ice_put_rx_buf() on
all buffers between first_desc and next_to_clean. Borrow the logic of a
similar function in i40e used for this same purpose. Use the same logic
also in ice_get_pgcnts().
Instead of iterating over just the number of fragments, use a loop which
iterates until the current index reaches to the next_to_clean element just
past the current frame. Unlike i40e, the ice_put_rx_mbuf() function does
call ice_put_rx_buf() on the last buffer of the frame indicating the end of
packet.
For non-linear (multi-buffer) frames, we need to take care when adjusting
the pagecnt_bias. An XDP program might release fragments from the tail of
the frame, in which case that fragment page is already released. Only
update the pagecnt_bias for the first descriptor and fragments still
remaining post-XDP program. Take care to only access the shared info for
fragmented buffers, as this avoids a significant cache miss.
The xdp_xmit value only needs to be updated if an XDP program is run, and
only once per packet. Drop the xdp_xmit pointer argument from
ice_put_rx_mbuf(). Instead, set xdp_xmit in the ice_clean_rx_irq() function
directly. This avoids needing to pass the argument and avoids an extra
bit-wise OR for each buffer in the frame.
Move the increment of the ntc local variable to ensure its updated *before*
all calls to ice_get_pgcnts() or ice_put_rx_mbuf(), as the loop logic
requires the index of the element just after the current frame.
Now that we use an index pointer in the ring to identify the packet, we no
longer need to track or cache the number of fragments in the rx_ring. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path
During tests of another unrelated patch I was able to trigger this
error: Objects remaining on __kmem_cache_shutdown() |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: properly unshare skbs in ax25_kiss_rcv()
Bernard Pidoux reported a regression apparently caused by commit
c353e8983e0d ("net: introduce per netns packet chains").
skb->dev becomes NULL and we crash in __netif_receive_skb_core().
Before above commit, different kind of bugs or corruptions could happen
without a major crash.
But the root cause is that ax25_kiss_rcv() can queue/mangle input skb
without checking if this skb is shared or not.
Many thanks to Bernard Pidoux for his help, diagnosis and tests.
We had a similar issue years ago fixed with commit 7aaed57c5c28
("phonet: properly unshare skbs in phonet_rcv()"). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Remove skb secpath if xfrm state is not found
Hardware returns a unique identifier for a decrypted packet's xfrm
state, this state is looked up in an xarray. However, the state might
have been freed by the time of this lookup.
Currently, if the state is not found, only a counter is incremented.
The secpath (sp) extension on the skb is not removed, resulting in
sp->len becoming 0.
Subsequently, functions like __xfrm_policy_check() attempt to access
fields such as xfrm_input_state(skb)->xso.type (which dereferences
sp->xvec[sp->len - 1]) without first validating sp->len. This leads to
a crash when dereferencing an invalid state pointer.
This patch prevents the crash by explicitly removing the secpath
extension from the skb if the xfrm state is not found after hardware
decryption. This ensures downstream functions do not operate on a
zero-length secpath.
BUG: unable to handle page fault for address: ffffffff000002c8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 282e067 P4D 282e067 PUD 0
Oops: Oops: 0000 [#1] SMP
CPU: 12 UID: 0 PID: 0 Comm: swapper/12 Not tainted 6.15.0-rc7_for_upstream_min_debug_2025_05_27_22_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:__xfrm_policy_check+0x61a/0xa30
Code: b6 77 7f 83 e6 02 74 14 4d 8b af d8 00 00 00 41 0f b6 45 05 c1 e0 03 48 98 49 01 c5 41 8b 45 00 83 e8 01 48 98 49 8b 44 c5 10 <0f> b6 80 c8 02 00 00 83 e0 0c 3c 04 0f 84 0c 02 00 00 31 ff 80 fa
RSP: 0018:ffff88885fb04918 EFLAGS: 00010297
RAX: ffffffff00000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000000
RBP: ffffffff8311af80 R08: 0000000000000020 R09: 00000000c2eda353
R10: ffff88812be2bbc8 R11: 000000001faab533 R12: ffff88885fb049c8
R13: ffff88812be2bbc8 R14: 0000000000000000 R15: ffff88811896ae00
FS: 0000000000000000(0000) GS:ffff8888dca82000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffff000002c8 CR3: 0000000243050002 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
? try_to_wake_up+0x108/0x4c0
? udp4_lib_lookup2+0xbe/0x150
? udp_lib_lport_inuse+0x100/0x100
? __udp4_lib_lookup+0x2b0/0x410
__xfrm_policy_check2.constprop.0+0x11e/0x130
udp_queue_rcv_one_skb+0x1d/0x530
udp_unicast_rcv_skb+0x76/0x90
__udp4_lib_rcv+0xa64/0xe90
ip_protocol_deliver_rcu+0x20/0x130
ip_local_deliver_finish+0x75/0xa0
ip_local_deliver+0xc1/0xd0
? ip_protocol_deliver_rcu+0x130/0x130
ip_sublist_rcv+0x1f9/0x240
? ip_rcv_finish_core+0x430/0x430
ip_list_rcv+0xfc/0x130
__netif_receive_skb_list_core+0x181/0x1e0
netif_receive_skb_list_internal+0x200/0x360
? mlx5e_build_rx_skb+0x1bc/0xda0 [mlx5_core]
gro_receive_skb+0xfd/0x210
mlx5e_handle_rx_cqe_mpwrq+0x141/0x280 [mlx5_core]
mlx5e_poll_rx_cq+0xcc/0x8e0 [mlx5_core]
? mlx5e_handle_rx_dim+0x91/0xd0 [mlx5_core]
mlx5e_napi_poll+0x114/0xab0 [mlx5_core]
__napi_poll+0x25/0x170
net_rx_action+0x32d/0x3a0
? mlx5_eq_comp_int+0x8d/0x280 [mlx5_core]
? notifier_call_chain+0x33/0xa0
handle_softirqs+0xda/0x250
irq_exit_rcu+0x6d/0xc0
common_interrupt+0x81/0xa0
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw-nuss: Fix skb size by accounting for skb_shared_info
While transitioning from netdev_alloc_ip_align() to build_skb(), memory
for the "skb_shared_info" member of an "skb" was not allocated. Fix this
by allocating "PAGE_SIZE" as the skb length, accounting for the packet
length, headroom and tailroom, thereby including the required memory space
for skb_shared_info. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix memory leak of bio integrity
If nvmet receives commands with metadata there is a continuous memory
leak of kmalloc-128 slab or more precisely bio->bi_integrity.
Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio")
each user of bio_init has to use bio_uninit as well. Otherwise the bio
integrity is not getting free. Nvmet uses bio_init for inline bios.
Uninit the inline bio to complete deallocation of integrity in bio. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix panic when calling skb_linearize
The panic can be reproduced by executing the command:
./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress --rx-strp 100000
Then a kernel panic was captured:
'''
[ 657.460555] kernel BUG at net/core/skbuff.c:2178!
[ 657.462680] Tainted: [W]=WARN
[ 657.463287] Workqueue: events sk_psock_backlog
...
[ 657.469610] <TASK>
[ 657.469738] ? die+0x36/0x90
[ 657.469916] ? do_trap+0x1d0/0x270
[ 657.470118] ? pskb_expand_head+0x612/0xf40
[ 657.470376] ? pskb_expand_head+0x612/0xf40
[ 657.470620] ? do_error_trap+0xa3/0x170
[ 657.470846] ? pskb_expand_head+0x612/0xf40
[ 657.471092] ? handle_invalid_op+0x2c/0x40
[ 657.471335] ? pskb_expand_head+0x612/0xf40
[ 657.471579] ? exc_invalid_op+0x2d/0x40
[ 657.471805] ? asm_exc_invalid_op+0x1a/0x20
[ 657.472052] ? pskb_expand_head+0xd1/0xf40
[ 657.472292] ? pskb_expand_head+0x612/0xf40
[ 657.472540] ? lock_acquire+0x18f/0x4e0
[ 657.472766] ? find_held_lock+0x2d/0x110
[ 657.472999] ? __pfx_pskb_expand_head+0x10/0x10
[ 657.473263] ? __kmalloc_cache_noprof+0x5b/0x470
[ 657.473537] ? __pfx___lock_release.isra.0+0x10/0x10
[ 657.473826] __pskb_pull_tail+0xfd/0x1d20
[ 657.474062] ? __kasan_slab_alloc+0x4e/0x90
[ 657.474707] sk_psock_skb_ingress_enqueue+0x3bf/0x510
[ 657.475392] ? __kasan_kmalloc+0xaa/0xb0
[ 657.476010] sk_psock_backlog+0x5cf/0xd70
[ 657.476637] process_one_work+0x858/0x1a20
'''
The panic originates from the assertion BUG_ON(skb_shared(skb)) in
skb_linearize(). A previous commit(see Fixes tag) introduced skb_get()
to avoid race conditions between skb operations in the backlog and skb
release in the recvmsg path. However, this caused the panic to always
occur when skb_linearize is executed.
The "--rx-strp 100000" parameter forces the RX path to use the strparser
module which aggregates data until it reaches 100KB before calling sockmap
logic. The 100KB payload exceeds MAX_MSG_FRAGS, triggering skb_linearize.
To fix this issue, just move skb_get into sk_psock_skb_ingress_enqueue.
'''
sk_psock_backlog:
sk_psock_handle_skb
skb_get(skb) <== we move it into 'sk_psock_skb_ingress_enqueue'
sk_psock_skb_ingress____________
↓
|
| → sk_psock_skb_ingress_self
| sk_psock_skb_ingress_enqueue
sk_psock_verdict_apply_________________↑ skb_linearize
'''
Note that for verdict_apply path, the skb_get operation is unnecessary so
we add 'take_ref' param to control it's behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix udp gso skb_segment after pull from frag_list
Commit a1e40ac5b5e9 ("net: gso: fix udp gso fraglist segmentation after
pull from frag_list") detected invalid geometry in frag_list skbs and
redirects them from skb_segment_list to more robust skb_segment. But some
packets with modified geometry can also hit bugs in that code. We don't
know how many such cases exist. Addressing each one by one also requires
touching the complex skb_segment code, which risks introducing bugs for
other types of skbs. Instead, linearize all these packets that fail the
basic invariants on gso fraglist skbs. That is more robust.
If only part of the fraglist payload is pulled into head_skb, it will
always cause exception when splitting skbs by skb_segment. For detailed
call stack information, see below.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify fraglist skbs, breaking these invariants.
In extreme cases they pull one part of data into skb linear. For UDP,
this causes three payloads with lengths of (11,11,10) bytes were
pulled tail to become (12,10,10) bytes.
The skbs no longer meets the above SKB_GSO_FRAGLIST conditions because
payload was pulled into head_skb, it needs to be linearized before pass
to regular skb_segment.
skb_segment+0xcd0/0xd14
__udp_gso_segment+0x334/0x5f4
udp4_ufo_fragment+0x118/0x15c
inet_gso_segment+0x164/0x338
skb_mac_gso_segment+0xc4/0x13c
__skb_gso_segment+0xc4/0x124
validate_xmit_skb+0x9c/0x2c0
validate_xmit_skb_list+0x4c/0x80
sch_direct_xmit+0x70/0x404
__dev_queue_xmit+0x64c/0xe5c
neigh_resolve_output+0x178/0x1c4
ip_finish_output2+0x37c/0x47c
__ip_finish_output+0x194/0x240
ip_finish_output+0x20/0xf4
ip_output+0x100/0x1a0
NF_HOOK+0xc4/0x16c
ip_forward+0x314/0x32c
ip_rcv+0x90/0x118
__netif_receive_skb+0x74/0x124
process_backlog+0xe8/0x1a4
__napi_poll+0x5c/0x1f8
net_rx_action+0x154/0x314
handle_softirqs+0x154/0x4b8
[118.376811] [C201134] rxq0_pus: [name:bug&]kernel BUG at net/core/skbuff.c:4278!
[118.376829] [C201134] rxq0_pus: [name:traps&]Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[118.470774] [C201134] rxq0_pus: [name:mrdump&]Kernel Offset: 0x178cc00000 from 0xffffffc008000000
[118.470810] [C201134] rxq0_pus: [name:mrdump&]PHYS_OFFSET: 0x40000000
[118.470827] [C201134] rxq0_pus: [name:mrdump&]pstate: 60400005 (nZCv daif +PAN -UAO)
[118.470848] [C201134] rxq0_pus: [name:mrdump&]pc : [0xffffffd79598aefc] skb_segment+0xcd0/0xd14
[118.470900] [C201134] rxq0_pus: [name:mrdump&]lr : [0xffffffd79598a5e8] skb_segment+0x3bc/0xd14
[118.470928] [C201134] rxq0_pus: [name:mrdump&]sp : ffffffc008013770 |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: sch_sfq: fix a potential crash on gso_skb handling
SFQ has an assumption of always being able to queue at least one packet.
However, after the blamed commit, sch->q.len can be inflated by packets
in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed
by an immediate drop.
Fix sfq_drop() to properly clear q->tail in this situation.
ip netns add lb
ip link add dev to-lb type veth peer name in-lb netns lb
ethtool -K to-lb tso off # force qdisc to requeue gso_skb
ip netns exec lb ethtool -K in-lb gro on # enable NAPI
ip link set dev to-lb up
ip -netns lb link set dev in-lb up
ip addr add dev to-lb 192.168.20.1/24
ip -netns lb addr add dev in-lb 192.168.20.2/24
tc qdisc replace dev to-lb root sfq limit 100
ip netns exec lb netserver
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 &
netperf -H 192.168.20.2 -l 100 & |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: fix skb leaks
A few error paths are missing a kfree_skb. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix memory leak in tipc_link_xmit
In case the backlog transmit queue for system-importance messages is overloaded,
tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to
memory leak and failure when a skb is allocated.
This commit fixes this issue by purging the skb list before tipc_link_xmit()
returns. |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: Remove broken autobind
Binding AX25 socket by using the autobind feature leads to memory leaks
in ax25_connect() and also refcount leaks in ax25_release(). Memory
leak was detected with kmemleak:
================================================================
unreferenced object 0xffff8880253cd680 (size 96):
backtrace:
__kmalloc_node_track_caller_noprof (./include/linux/kmemleak.h:43)
kmemdup_noprof (mm/util.c:136)
ax25_rt_autobind (net/ax25/ax25_route.c:428)
ax25_connect (net/ax25/af_ax25.c:1282)
__sys_connect_file (net/socket.c:2045)
__sys_connect (net/socket.c:2064)
__x64_sys_connect (net/socket.c:2067)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
================================================================
When socket is bound, refcounts must be incremented the way it is done
in ax25_bind() and ax25_setsockopt() (SO_BINDTODEVICE). In case of
autobind, the refcounts are not incremented.
This bug leads to the following issue reported by Syzkaller:
================================================================
ax25_connect(): syz-executor318 uses autobind, please contact jreuter@yaina.de
------------[ cut here ]------------
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 5317 at lib/refcount.c:31 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
Modules linked in:
CPU: 0 UID: 0 PID: 5317 Comm: syz-executor318 Not tainted 6.14.0-rc4-syzkaller-00278-gece144f151ac #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
...
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x6af/0x7e0 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4302 [inline]
netdev_put include/linux/netdevice.h:4319 [inline]
ax25_release+0x368/0x960 net/ax25/af_ax25.c:1080
__sock_release net/socket.c:647 [inline]
sock_close+0xbc/0x240 net/socket.c:1398
__fput+0x3e9/0x9f0 fs/file_table.c:464
__do_sys_close fs/open.c:1580 [inline]
__se_sys_close fs/open.c:1565 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1565
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Considering the issues above and the comments left in the code that say:
"check if we can remove this feature. It is broken."; "autobinding in this
may or may not work"; - it is better to completely remove this feature than
to fix it because it is broken and leads to various kinds of memory bugs.
Now calling connect() without first binding socket will result in an
error (-EINVAL). Userspace software that relies on the autobind feature
might get broken. However, this feature does not seem widely used with
this specific driver as it was not reliable at any point of time, and it
is already broken anyway. E.g. ax25-tools and ax25-apps packages for
popular distributions do not use the autobind feature for AF_AX25.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: put dl_stid if fail to queue dl_recall
Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we
increment the reference count of dl_stid.
We expect that after the corresponding work_struct is processed, the
reference count of dl_stid will be decremented through the callback
function nfsd4_cb_recall_release.
However, if the call to nfsd4_run_cb fails, the incremented reference
count of dl_stid will not be decremented correspondingly, leading to the
following nfs4_stid leak:
unreferenced object 0xffff88812067b578 (size 344):
comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s)
hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........
00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N..
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfsd4_process_open1+0x34/0x300
nfsd4_open+0x2d1/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
unreferenced object 0xffff8881499f4d28 (size 368):
comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I....
30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... .......
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfs4_alloc_stid+0x29/0x210
alloc_init_deleg+0x92/0x2e0
nfs4_set_delegation+0x284/0xc00
nfs4_open_delegation+0x216/0x3f0
nfsd4_process_open2+0x2b3/0xee0
nfsd4_open+0x770/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if
fail to queue dl_recall. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: unshare packets when reassembling
Ensure that the frag_list used for reassembly isn't shared with other
packets. This avoids incorrect reassembly when packets are cloned, and
prevents a memory leak due to circular references between fragments and
their skb_shared_info.
The upcoming MCTP-over-USB driver uses skb_clone which can trigger the
problem - other MCTP drivers don't share SKBs.
A kunit test is added to reproduce the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
netmem: prevent TX of unreadable skbs
Currently on stable trees we have support for netmem/devmem RX but not
TX. It is not safe to forward/redirect an RX unreadable netmem packet
into the device's TX path, as the device may call dma-mapping APIs on
dma addrs that should not be passed to it.
Fix this by preventing the xmit of unreadable skbs.
Tested by configuring tc redirect:
sudo tc qdisc add dev eth1 ingress
sudo tc filter add dev eth1 ingress protocol ip prio 1 flower ip_proto \
tcp src_ip 192.168.1.12 action mirred egress redirect dev eth1
Before, I see unreadable skbs in the driver's TX path passed to dma
mapping APIs.
After, I don't see unreadable skbs in the driver's TX path passed to dma
mapping APIs. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix vport QoS cleanup on error
When enabling vport QoS fails, the scheduling node was never freed,
causing a leak.
Add the missing free and reset the vport scheduling node pointer to
NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: Fix refcount leak caused by setting SO_BINDTODEVICE sockopt
If an AX25 device is bound to a socket by setting the SO_BINDTODEVICE
socket option, a refcount leak will occur in ax25_release().
Commit 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
added decrement of device refcounts in ax25_release(). In order for that
to work correctly the refcounts must already be incremented when the
device is bound to the socket. An AX25 device can be bound to a socket
by either calling ax25_bind() or setting SO_BINDTODEVICE socket option.
In both cases the refcounts should be incremented, but in fact it is done
only in ax25_bind().
This bug leads to the following issue reported by Syzkaller:
================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 1 PID: 5932 at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Modules linked in:
CPU: 1 UID: 0 PID: 5932 Comm: syz-executor424 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x710/0x820 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4156 [inline]
netdev_put include/linux/netdevice.h:4173 [inline]
netdev_put include/linux/netdevice.h:4169 [inline]
ax25_release+0x33f/0xa10 net/ax25/af_ax25.c:1069
__sock_release+0xb0/0x270 net/socket.c:640
sock_close+0x1c/0x30 net/socket.c:1408
...
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Fix the implementation of ax25_setsockopt() by adding increment of
refcounts for the new device bound, and decrement of refcounts for
the old unbound device. |
