| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The issue was addressed with improved UI. This issue is fixed in Safari 26.6, iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. Visiting a website that frames malicious content may lead to UI spoofing. |
| A flaw has been found in ggml-org llama.cpp e15efe0. This vulnerability affects the function transform of the file common/json-schema-to-grammar.cpp of the component JSON-Schema-to-GBNF Conversion. This manipulation causes uncontrolled recursion. The attack may be initiated remotely. The pull request to fix this issue awaits acceptance. |
| Allocation of Resources Without Limits or Throttling vulnerability in ninenines cowboy allows an unauthenticated remote attacker to exhaust connection process memory over HTTP/1.1.
The HTTP/1.1 handler in cowboy_http enforces the max_headers limit by counting the number of distinct header names in a map (maps:size(Headers)). When a request contains multiple header lines with the same name, the values are concatenated into a single ever-growing binary stored under that one map key (", " for regular headers, "; " for cookies), so the map size stays at one and the max_headers cap (default 100) is never reached. Because no accumulator bounds the total number of header lines or the total byte size of the header block (only per-line max_header_name_length and max_header_value_length apply), an unauthenticated client can send an arbitrary number of header lines with the same name and grow the connection process's binary memory to arbitrary size within the request window.
The impact per connection is bounded by request_timeout (default 5 seconds, not reset by header data), and by max_heap_size when set (the offending connection process is killed once its heap grows past the limit). When max_heap_size is left at the default (unset), sustained abuse can drive the Erlang VM into out-of-memory conditions.
This issue affects cowboy from 2.0.0-pre.4 before 2.18.0. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item
commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time. |
| Hulumi is an open-source toolkit that ships secure-by-default cloud and platform infrastructure components for Pulumi. Prior to version 1.4.0, consumers using AccountFoundation could ship an AWS account whose CloudTrail / Config audit logs were deletable by any S3-delete-capable principal — while believing the startup-hardened tier guaranteed tamper-resistance. Sandbox-tier deployments had no audit immutability at all (defects 1 and 3 compounded). This issue has been patched in version 1.4.0. |
| A malicious LDAP server, which a Thunderbird user is configured to query for address-book autocomplete, can stash arbitrarily large amounts of attacker-supplied data into the Thunderbird LDAP client until it crashes due to memory exhaustion. This vulnerability was fixed in Thunderbird 152.0.1 and Thunderbird 140.12.1. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_read_to_pagecache() to pause on subreq failure
Fix netfs_read_to_pagecache() so that it pauses the generation of new
subrequests if an already-issued subrequest fails. |
| pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.4, the BER, CER, and DER decoders process OBJECT IDENTIFIER and RELATIVE-OID values in quadratic time relative to the number of arcs, so a small crafted payload containing an OID with many arcs consumes excessive CPU per decode() call and can deny service to applications that decode untrusted ASN.1 data. The corresponding encoders have the same quadratic behavior when an application re-encodes previously decoded attacker-supplied values. This issue is fixed in version 0.6.4. |
| Insufficient Technical Documentation vulnerability in Apache Tomcat since the requirements to securely configure the EncryptInterceptor were not clearly documented.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.23, from 10.1.0-M1 through 10.1.56, from 9.0.13 through 9.0.119, from 8.5.38 through 8.5.100, from 7.0.100 through 7.0.109. Other versions that have reached end of support may also be affected.
Users are recommended to upgrade to version 11.0.24, 10.1.57 or 9.0.120 which fix the issue. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.14.0, an attacker can craft a PDF with repeated malformed cross-reference streams that cause pypdf to spend long runtimes recovering broken cross-reference table entries. This issue is fixed in version 6.14.0. |
| Pillow is a Python imaging library. Prior to 12.3.0, PIL/FontFile.py FontFile.compile() assembled per-glyph images into a combined bitmap with Image.new("1", (xsize, ysize)) without calling Image._decompression_bomb_check(), allowing a font to trigger excessive allocation during conversion or saving. This issue is fixed in version 12.3.0. |
| A flaw has been found in connorskees grass up to 0.13.4. The affected element is the function grass_compiler::raw_to_parse_error of the component UTF-8 Character Handler. Executing a manipulation can lead to denial of service. The attack is restricted to local execution. The exploit has been published and may be used. In Issue #117 with similar structure the project maintainer explains: "DoS vulnerabilities are generally fine in Sass compilers -- they are trivially possible with recursive functions, infinite loops, nested mixins, etc. The description here is wrong. Compile time is not expected to be linear relative to the input, and the @extend algorithm is definitionally exponential." |
| decode-uri-component through 0.4.1 is vulnerable to denial of service. The decode() function splits input on '%' producing N tokens and calls decodeComponents(), exhibiting super-linear parsing time: 200 '%ab' tokens takes approximately 0.7s, 700 tokens approximately 6s, and 1400 tokens approximately 33s. An attacker can cause significant CPU consumption and event-loop blocking via crafted input. |
| A flaw was found in libsoup. The implementation of HTTP range requests is vulnerable to a resource consumption attack. This flaw allows a malicious client to request the same range many times in a single HTTP request, causing the server to use large amounts of memory. This does not allow for a full denial of service. |
| shell-quote prior to 1.8.5 finalizes parsed tokens in parse() using Array.prototype.concat as a reduce accumulator, which reallocates and copies the entire growing array on every iteration. As a result parse() runs in O(n^2) time relative to the number of input tokens. An attacker who can supply an attacker-controlled string to any code path that calls parse() (no shell metacharacters are required; plain space-separated words suffice) can block the single-threaded Node.js event loop for an extended period with a small input, resulting in a denial of service. There is no code execution or data disclosure; impact is to availability only. Fixed in 1.8.5. |
| jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. From 2.13.0 until 2.14.0, a potential Denial-of-Service exists when attacker sends deeply nested JSON if (and only if) the service reads deeply nested (1000s of levels) JSON as JsonNode (ObjectMapper.readTree()) and writes out same (or modifided) node using JsonNode.toString(). This can consume significant amount of resources with concurrent relatively small requests (1000 nested arrays is 2kB). This vulnerability is fixed in 2.14.0. |
| ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: drop stray 'static' from fast-RX rx_result
ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but
its per-invocation rx_result is declared static. Concurrent callers then
share one instance and can overwrite each other's result between
ieee80211_rx_mesh_data() and the switch on res.
That can make a packet that was queued or consumed by
ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make
a packet that should continue return as queued.
Make res an automatic variable so each invocation keeps its own result. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
For those endpoint devices connect to system via hotplug capable ports,
users could request a hot reset to the device by flapping device's link
through setting the slot's link control register, as pciehp_ist() DLLSC
interrupt sequence response, pciehp will unload the device driver and
then power it off. thus cause an IOMMU device-TLB invalidation (Intel
VT-d spec, or ATS Invalidation in PCIe spec r6.1) request for non-existence
target device to be sent and deadly loop to retry that request after ITE
fault triggered in interrupt context.
That would cause following continuous hard lockup warning and system hang
[ 4211.433662] pcieport 0000:17:01.0: pciehp: Slot(108): Link Down
[ 4211.433664] pcieport 0000:17:01.0: pciehp: Slot(108): Card not present
[ 4223.822591] NMI watchdog: Watchdog detected hard LOCKUP on cpu 144
[ 4223.822622] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
OE kernel version xxxx
[ 4223.822623] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822623] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822624] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 1
0 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822624] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822625] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
[ 4223.822625] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
[ 4223.822625] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
[ 4223.822626] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
[ 4223.822626] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822626] FS: 0000000000000000(0000) GS:ffffa237ae400000(0000)
knlGS:0000000000000000
[ 4223.822627] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4223.822627] CR2: 00007ffe86515d80 CR3: 000002fd3000a001 CR4: 0000000000770ee0
[ 4223.822627] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4223.822628] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 4223.822628] PKRU: 55555554
[ 4223.822628] Call Trace:
[ 4223.822628] qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822628] __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822629] dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822629] intel_iommu_release_device+0x1f/0x30
[ 4223.822629] iommu_release_device+0x33/0x60
[ 4223.822629] iommu_bus_notifier+0x7f/0x90
[ 4223.822630] blocking_notifier_call_chain+0x60/0x90
[ 4223.822630] device_del+0x2e5/0x420
[ 4223.822630] pci_remove_bus_device+0x70/0x110
[ 4223.822630] pciehp_unconfigure_device+0x7c/0x130
[ 4223.822631] pciehp_disable_slot+0x6b/0x100
[ 4223.822631] pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822631] pciehp_ist+0x176/0x180
[ 4223.822631] ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822632] irq_thread_fn+0x19/0x50
[ 4223.822632] irq_thread+0x104/0x190
[ 4223.822632] ? irq_forced_thread_fn+0x90/0x90
[ 4223.822632] ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822633] kthread+0x114/0x130
[ 4223.822633] ? __kthread_cancel_work+0x40/0x40
[ 4223.822633] ret_from_fork+0x1f/0x30
[ 4223.822633] Kernel panic - not syncing: Hard LOCKUP
[ 4223.822634] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
OE kernel version xxxx
[ 4223.822634] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822634] Call Trace:
[ 4223.822634] <NMI>
[ 4223.822635] dump_stack+0x6d/0x88
[ 4223.822635] panic+0x101/0x2d0
[ 4223.822635] ? ret_from_fork+0x11/0x30
[ 4223.822635] nmi_panic.cold.14+0xc/0xc
[ 4223.822636] watchdog_overflow_callback.cold.8+0x6d/0x81
[ 4223.822636] __perf_event_overflow+0x4f/0xf0
[ 4223.822636] handle_pmi_common
---truncated--- |
| A security flaw has been discovered in musl libc up to 1.2.6. Affected is the function iconv of the file src/locale/iconv.c of the component GB18030 4-byte Decoder. Performing a manipulation results in inefficient algorithmic complexity. The attack must be initiated from a local position. To fix this issue, it is recommended to deploy a patch. |
