| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Avoid potential division by zero in function_stat_show()
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: ensure network headers are in skb linear part
syzbot found that ipvlan_process_v6_outbound() was assuming
the IPv6 network header isis present in skb->head [1]
Add the needed pskb_network_may_pull() calls for both
IPv4 and IPv6 handlers.
[1]
BUG: KMSAN: uninit-value in __ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47
__ipv6_addr_type+0xa2/0x490 net/ipv6/addrconf_core.c:47
ipv6_addr_type include/net/ipv6.h:555 [inline]
ip6_route_output_flags_noref net/ipv6/route.c:2616 [inline]
ip6_route_output_flags+0x51/0x720 net/ipv6/route.c:2651
ip6_route_output include/net/ip6_route.h:93 [inline]
ipvlan_route_v6_outbound+0x24e/0x520 drivers/net/ipvlan/ipvlan_core.c:476
ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:491 [inline]
ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:541 [inline]
ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:605 [inline]
ipvlan_queue_xmit+0xd72/0x1780 drivers/net/ipvlan/ipvlan_core.c:671
ipvlan_start_xmit+0x5b/0x210 drivers/net/ipvlan/ipvlan_main.c:223
__netdev_start_xmit include/linux/netdevice.h:5150 [inline]
netdev_start_xmit include/linux/netdevice.h:5159 [inline]
xmit_one net/core/dev.c:3735 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3751
sch_direct_xmit+0x399/0xd40 net/sched/sch_generic.c:343
qdisc_restart net/sched/sch_generic.c:408 [inline]
__qdisc_run+0x14da/0x35d0 net/sched/sch_generic.c:416
qdisc_run+0x141/0x4d0 include/net/pkt_sched.h:127
net_tx_action+0x78b/0x940 net/core/dev.c:5484
handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561
__do_softirq+0x14/0x1a kernel/softirq.c:595
do_softirq+0x9a/0x100 kernel/softirq.c:462
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
__dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4611
dev_queue_xmit include/linux/netdevice.h:3311 [inline]
packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3132 [inline]
packet_sendmsg+0x93e0/0xa7e0 net/packet/af_packet.c:3164
sock_sendmsg_nosec net/socket.c:718 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes: Reject the shared zeropage in uprobe_write_opcode()
We triggered the following crash in syzkaller tests:
BUG: Bad page state in process syz.7.38 pfn:1eff3
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3
flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff)
raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_unref_page_prepare+0x401/0x500
free_unref_page+0x6d/0x1b0
uprobe_write_opcode+0x460/0x8e0
install_breakpoint.part.0+0x51/0x80
register_for_each_vma+0x1d9/0x2b0
__uprobe_register+0x245/0x300
bpf_uprobe_multi_link_attach+0x29b/0x4f0
link_create+0x1e2/0x280
__sys_bpf+0x75f/0xac0
__x64_sys_bpf+0x1a/0x30
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
BUG: Bad rss-counter state mm:00000000452453e0 type:MM_FILEPAGES val:-1
The following syzkaller test case can be used to reproduce:
r2 = creat(&(0x7f0000000000)='./file0\x00', 0x8)
write$nbd(r2, &(0x7f0000000580)=ANY=[], 0x10)
r4 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x42, 0x0)
mmap$IORING_OFF_SQ_RING(&(0x7f0000ffd000/0x3000)=nil, 0x3000, 0x0, 0x12, r4, 0x0)
r5 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r5, 0xc018aa3f, &(0x7f0000000040)={0xaa, 0x20})
r6 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r6, 0xc018aa3f, &(0x7f0000000140))
ioctl$UFFDIO_REGISTER(r6, 0xc020aa00, &(0x7f0000000100)={{&(0x7f0000ffc000/0x4000)=nil, 0x4000}, 0x2})
ioctl$UFFDIO_ZEROPAGE(r5, 0xc020aa04, &(0x7f0000000000)={{&(0x7f0000ffd000/0x1000)=nil, 0x1000}})
r7 = bpf$PROG_LOAD(0x5, &(0x7f0000000140)={0x2, 0x3, &(0x7f0000000200)=ANY=[@ANYBLOB="1800000000120000000000000000000095"], &(0x7f0000000000)='GPL\x00', 0x7, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, @fallback=0x30, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x10, 0x0, @void, @value}, 0x94)
bpf$BPF_LINK_CREATE_XDP(0x1c, &(0x7f0000000040)={r7, 0x0, 0x30, 0x1e, @val=@uprobe_multi={&(0x7f0000000080)='./file0\x00', &(0x7f0000000100)=[0x2], 0x0, 0x0, 0x1}}, 0x40)
The cause is that zero pfn is set to the PTE without increasing the RSS
count in mfill_atomic_pte_zeropage() and the refcount of zero folio does
not increase accordingly. Then, the operation on the same pfn is performed
in uprobe_write_opcode()->__replace_page() to unconditional decrease the
RSS count and old_folio's refcount.
Therefore, two bugs are introduced:
1. The RSS count is incorrect, when process exit, the check_mm() report
error "Bad rss-count".
2. The reserved folio (zero folio) is freed when folio->refcount is zero,
then free_pages_prepare->free_page_is_bad() report error
"Bad page state".
There is more, the following warning could also theoretically be triggered:
__replace_page()
-> ...
-> folio_remove_rmap_pte()
-> VM_WARN_ON_FOLIO(is_zero_folio(folio), folio)
Considering that uprobe hit on the zero folio is a very rare case, just
reject zero old folio immediately after get_user_page_vma_remote().
[ mingo: Cleaned up the changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: npcm: disable interrupt enable bit before devm_request_irq
The customer reports that there is a soft lockup issue related to
the i2c driver. After checking, the i2c module was doing a tx transfer
and the bmc machine reboots in the middle of the i2c transaction, the i2c
module keeps the status without being reset.
Due to such an i2c module status, the i2c irq handler keeps getting
triggered since the i2c irq handler is registered in the kernel booting
process after the bmc machine is doing a warm rebooting.
The continuous triggering is stopped by the soft lockup watchdog timer.
Disable the interrupt enable bit in the i2c module before calling
devm_request_irq to fix this issue since the i2c relative status bit
is read-only.
Here is the soft lockup log.
[ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1]
[ 28.183351] Modules linked in:
[ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1
[ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 28.208128] pc : __do_softirq+0xb0/0x368
[ 28.212055] lr : __do_softirq+0x70/0x368
[ 28.215972] sp : ffffff8035ebca00
[ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780
[ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0
[ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b
[ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff
[ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000
[ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2
[ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250
[ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434
[ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198
[ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40
[ 28.290611] Call trace:
[ 28.293052] __do_softirq+0xb0/0x368
[ 28.296625] __irq_exit_rcu+0xe0/0x100
[ 28.300374] irq_exit+0x14/0x20
[ 28.303513] handle_domain_irq+0x68/0x90
[ 28.307440] gic_handle_irq+0x78/0xb0
[ 28.311098] call_on_irq_stack+0x20/0x38
[ 28.315019] do_interrupt_handler+0x54/0x5c
[ 28.319199] el1_interrupt+0x2c/0x4c
[ 28.322777] el1h_64_irq_handler+0x14/0x20
[ 28.326872] el1h_64_irq+0x74/0x78
[ 28.330269] __setup_irq+0x454/0x780
[ 28.333841] request_threaded_irq+0xd0/0x1b4
[ 28.338107] devm_request_threaded_irq+0x84/0x100
[ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0
[ 28.346990] platform_probe+0x6c/0xc4
[ 28.350653] really_probe+0xcc/0x45c
[ 28.354227] __driver_probe_device+0x8c/0x160
[ 28.358578] driver_probe_device+0x44/0xe0
[ 28.362670] __driver_attach+0x124/0x1d0
[ 28.366589] bus_for_each_dev+0x7c/0xe0
[ 28.370426] driver_attach+0x28/0x30
[ 28.373997] bus_add_driver+0x124/0x240
[ 28.377830] driver_register+0x7c/0x124
[ 28.381662] __platform_driver_register+0x2c/0x34
[ 28.386362] npcm_i2c_init+0x3c/0x5c
[ 28.389937] do_one_initcall+0x74/0x230
[ 28.393768] kernel_init_freeable+0x24c/0x2b4
[ 28.398126] kernel_init+0x28/0x130
[ 28.401614] ret_from_fork+0x10/0x20
[ 28.405189] Kernel panic - not syncing: softlockup: hung tasks
[ 28.411011] SMP: stopping secondary CPUs
[ 28.414933] Kernel Offset: disabled
[ 28.418412] CPU features: 0x00000000,00000802
[ 28.427644] Rebooting in 20 seconds.. |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: gl620a: fix endpoint checking in genelink_bind()
Syzbot reports [1] a warning in usb_submit_urb() triggered by
inconsistencies between expected and actually present endpoints
in gl620a driver. Since genelink_bind() does not properly
verify whether specified eps are in fact provided by the device,
in this case, an artificially manufactured one, one may get a
mismatch.
Fix the issue by resorting to a usbnet utility function
usbnet_get_endpoints(), usually reserved for this very problem.
Check for endpoints and return early before proceeding further if
any are missing.
[1] Syzbot report:
usb 5-1: Manufacturer: syz
usb 5-1: SerialNumber: syz
usb 5-1: config 0 descriptor??
gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ...
------------[ cut here ]------------
usb 5-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Modules linked in:
CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467
__netdev_start_xmit include/linux/netdevice.h:5002 [inline]
netdev_start_xmit include/linux/netdevice.h:5011 [inline]
xmit_one net/core/dev.c:3590 [inline]
dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606
sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343
__dev_xmit_skb net/core/dev.c:3827 [inline]
__dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400
dev_queue_xmit include/linux/netdevice.h:3168 [inline]
neigh_resolve_output net/core/neighbour.c:1514 [inline]
neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494
neigh_output include/net/neighbour.h:539 [inline]
ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141
__ip6_finish_output net/ipv6/ip6_output.c:215 [inline]
ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819
mld_send_cr net/ipv6/mcast.c:2120 [inline]
mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651
process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
efi: Don't map the entire mokvar table to determine its size
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220
...
Call Trace:
<TASK>
? __early_ioremap+0xef/0x220
? __warn.cold+0x93/0xfa
? __early_ioremap+0xef/0x220
? report_bug+0xff/0x140
? early_fixup_exception+0x5d/0xb0
? early_idt_handler_common+0x2f/0x3a
? __early_ioremap+0xef/0x220
? efi_mokvar_table_init+0xce/0x1d0
? setup_arch+0x864/0xc10
? start_kernel+0x6b/0xa10
? x86_64_start_reservations+0x24/0x30
? x86_64_start_kernel+0xed/0xf0
? common_startup_64+0x13e/0x141
</TASK>
---[ end trace 0000000000000000 ]---
mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187.
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place. |
| In the Linux kernel, the following vulnerability has been resolved:
tee: optee: Fix supplicant wait loop
OP-TEE supplicant is a user-space daemon and it's possible for it
be hung or crashed or killed in the middle of processing an OP-TEE
RPC call. It becomes more complicated when there is incorrect shutdown
ordering of the supplicant process vs the OP-TEE client application which
can eventually lead to system hang-up waiting for the closure of the
client application.
Allow the client process waiting in kernel for supplicant response to
be killed rather than indefinitely waiting in an unkillable state. Also,
a normal uninterruptible wait should not have resulted in the hung-task
watchdog getting triggered, but the endless loop would.
This fixes issues observed during system reboot/shutdown when supplicant
got hung for some reason or gets crashed/killed which lead to client
getting hung in an unkillable state. It in turn lead to system being in
hung up state requiring hard power off/on to recover. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The
cause of the issue was that eth_skb_pkt_type() accessed skb's data
that didn't contain an Ethernet header. This occurs when
bpf_prog_test_run_xdp() passes an invalid value as the user_data
argument to bpf_test_init().
Fix this by returning an error when user_data is less than ETH_HLEN in
bpf_test_init(). Additionally, remove the check for "if (user_size >
size)" as it is unnecessary.
[1]
BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
__xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635
xdp_recv_frames net/bpf/test_run.c:272 [inline]
xdp_test_run_batch net/bpf/test_run.c:361 [inline]
bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390
bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318
bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371
__sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777
__do_sys_bpf kernel/bpf/syscall.c:5866 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5864 [inline]
__x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864
x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
free_pages_prepare mm/page_alloc.c:1056 [inline]
free_unref_page+0x156/0x1320 mm/page_alloc.c:2657
__free_pages+0xa3/0x1b0 mm/page_alloc.c:4838
bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline]
ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235
bpf_map_free kernel/bpf/syscall.c:838 [inline]
bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310
worker_thread+0xedf/0x1550 kernel/workqueue.c:3391
kthread+0x535/0x6b0 kernel/kthread.c:389
ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/code-patching: Fix KASAN hit by not flagging text patching area as VM_ALLOC
Erhard reported the following KASAN hit while booting his PowerMac G4
with a KASAN-enabled kernel 6.13-rc6:
BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8
Write of size 8 at addr f1000000 by task chronyd/1293
CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2
Tainted: [W]=WARN
Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
Call Trace:
[c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable)
[c24375b0] [c0504998] print_report+0xdc/0x504
[c2437610] [c050475c] kasan_report+0xf8/0x108
[c2437690] [c0505a3c] kasan_check_range+0x24/0x18c
[c24376a0] [c03fb5e4] copy_to_kernel_nofault+0xd8/0x1c8
[c24376c0] [c004c014] patch_instructions+0x15c/0x16c
[c2437710] [c00731a8] bpf_arch_text_copy+0x60/0x7c
[c2437730] [c0281168] bpf_jit_binary_pack_finalize+0x50/0xac
[c2437750] [c0073cf4] bpf_int_jit_compile+0xb30/0xdec
[c2437880] [c0280394] bpf_prog_select_runtime+0x15c/0x478
[c24378d0] [c1263428] bpf_prepare_filter+0xbf8/0xc14
[c2437990] [c12677ec] bpf_prog_create_from_user+0x258/0x2b4
[c24379d0] [c027111c] do_seccomp+0x3dc/0x1890
[c2437ac0] [c001d8e0] system_call_exception+0x2dc/0x420
[c2437f30] [c00281ac] ret_from_syscall+0x0/0x2c
--- interrupt: c00 at 0x5a1274
NIP: 005a1274 LR: 006a3b3c CTR: 005296c8
REGS: c2437f40 TRAP: 0c00 Tainted: G W (6.13.0-rc6-PMacG4)
MSR: 0200f932 <VEC,EE,PR,FP,ME,IR,DR,RI> CR: 24004422 XER: 00000000
GPR00: 00000166 af8f3fa0 a7ee3540 00000001 00000000 013b6500 005a5858 0200f932
GPR08: 00000000 00001fe9 013d5fc8 005296c8 2822244c 00b2fcd8 00000000 af8f4b57
GPR16: 00000000 00000001 00000000 00000000 00000000 00000001 00000000 00000002
GPR24: 00afdbb0 00000000 00000000 00000000 006e0004 013ce060 006e7c1c 00000001
NIP [005a1274] 0x5a1274
LR [006a3b3c] 0x6a3b3c
--- interrupt: c00
The buggy address belongs to the virtual mapping at
[f1000000, f1002000) created by:
text_area_cpu_up+0x20/0x190
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x76e30
flags: 0x80000000(zone=2)
raw: 80000000 00000000 00000122 00000000 00000000 00000000 ffffffff 00000001
raw: 00000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
f0ffff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0ffff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f1000000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f1000080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f1000100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not
initialised hence not supposed to be used yet.
Powerpc text patching infrastructure allocates a virtual memory area
using get_vm_area() and flags it as VM_ALLOC. But that flag is meant
to be used for vmalloc() and vmalloc() allocated memory is not
supposed to be used before a call to __vmalloc_node_range() which is
never called for that area.
That went undetected until commit e4137f08816b ("mm, kasan, kmsan:
instrument copy_from/to_kernel_nofault")
The area allocated by text_area_cpu_up() is not vmalloc memory, it is
mapped directly on demand when needed by map_kernel_page(). There is
no VM flag corresponding to such usage, so just pass no flag. That way
the area will be unpoisonned and usable immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: avoid holding freeze_mutex during mmap operation
We use map->freeze_mutex to prevent races between map_freeze() and
memory mapping BPF map contents with writable permissions. The way we
naively do this means we'll hold freeze_mutex for entire duration of all
the mm and VMA manipulations, which is completely unnecessary. This can
potentially also lead to deadlocks, as reported by syzbot in [0].
So, instead, hold freeze_mutex only during writeability checks, bump
(proactively) "write active" count for the map, unlock the mutex and
proceed with mmap logic. And only if something went wrong during mmap
logic, then undo that "write active" counter increment.
[0] https://lore.kernel.org/bpf/678dcbc9.050a0220.303755.0066.GAE@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: core: flush gadget workqueue after device removal
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ctucanfd: handle skb allocation failure
If skb allocation fails, the pointer to struct can_frame is NULL. This
is actually handled everywhere inside ctucan_err_interrupt() except for
the only place.
Add the missed NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rose: lock the socket in rose_bind()
syzbot reported a soft lockup in rose_loopback_timer(),
with a repro calling bind() from multiple threads.
rose_bind() must lock the socket to avoid this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix possible int overflows in nilfs_fiemap()
Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result
by being prepared to go through potentially maxblocks == INT_MAX blocks,
the value in n may experience an overflow caused by left shift of blkbits.
While it is extremely unlikely to occur, play it safe and cast right hand
expression to wider type to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static analysis
tool SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Fix copy buffer page size
For non-registered buffer, fastrpc driver copies the buffer and
pass it to the remote subsystem. There is a problem with current
implementation of page size calculation which is not considering
the offset in the calculation. This might lead to passing of
improper and out-of-bounds page size which could result in
memory issue. Calculate page start and page end using the offset
adjusted address instead of absolute address. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: don't allow reconnect after disconnect
Following process can cause nbd_config UAF:
1) grab nbd_config temporarily;
2) nbd_genl_disconnect() flush all recv_work() and release the
initial reference:
nbd_genl_disconnect
nbd_disconnect_and_put
nbd_disconnect
flush_workqueue(nbd->recv_workq)
if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...))
nbd_config_put
-> due to step 1), reference is still not zero
3) nbd_genl_reconfigure() queue recv_work() again;
nbd_genl_reconfigure
config = nbd_get_config_unlocked(nbd)
if (!config)
-> succeed
if (!test_bit(NBD_RT_BOUND, ...))
-> succeed
nbd_reconnect_socket
queue_work(nbd->recv_workq, &args->work)
4) step 1) release the reference;
5) Finially, recv_work() will trigger UAF:
recv_work
nbd_config_put(nbd)
-> nbd_config is freed
atomic_dec(&config->recv_threads)
-> UAF
Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so
that nbd_genl_reconfigure() will fail. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: do not force clear folio if buffer is referenced
Patch series "nilfs2: protect busy buffer heads from being force-cleared".
This series fixes the buffer head state inconsistency issues reported by
syzbot that occurs when the filesystem is corrupted and falls back to
read-only, and the associated buffer head use-after-free issue.
This patch (of 2):
Syzbot has reported that after nilfs2 detects filesystem corruption and
falls back to read-only, inconsistencies in the buffer state may occur.
One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty()
to set a data or metadata buffer as dirty, but it detects that the buffer
is not in the uptodate state:
WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520
fs/buffer.c:1177
...
Call Trace:
<TASK>
nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598
nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73
nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344
nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdirat fs/namei.c:4295 [inline]
__se_sys_mkdirat fs/namei.c:4293 [inline]
__x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The other is when nilfs_btree_propagate(), which propagates the dirty
state to the ancestor nodes of a b-tree that point to a dirty buffer,
detects that the origin buffer is not dirty, even though it should be:
WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089
nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089
...
Call Trace:
<TASK>
nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345
nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587
nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006
nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline]
nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115
nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline]
nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Both of these issues are caused by the callbacks that handle the
page/folio write requests, forcibly clear various states, including the
working state of the buffers they hold, at unexpected times when they
detect read-only fallback.
Fix these issues by checking if the buffer is referenced before clearing
the page/folio state, and skipping the clear if it is. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: handle errors that nilfs_prepare_chunk() may return
Patch series "nilfs2: fix issues with rename operations".
This series fixes BUG_ON check failures reported by syzbot around rename
operations, and a minor behavioral issue where the mtime of a child
directory changes when it is renamed instead of moved.
This patch (of 2):
The directory manipulation routines nilfs_set_link() and
nilfs_delete_entry() rewrite the directory entry in the folio/page
previously read by nilfs_find_entry(), so error handling is omitted on the
assumption that nilfs_prepare_chunk(), which prepares the buffer for
rewriting, will always succeed for these. And if an error is returned, it
triggers the legacy BUG_ON() checks in each routine.
This assumption is wrong, as proven by syzbot: the buffer layer called by
nilfs_prepare_chunk() may call nilfs_get_block() if necessary, which may
fail due to metadata corruption or other reasons. This has been there all
along, but improved sanity checks and error handling may have made it more
reproducible in fuzzing tests.
Fix this issue by adding missing error paths in nilfs_set_link(),
nilfs_delete_entry(), and their caller nilfs_rename(). |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: Fix uninit-value in vxlan_vnifilter_dump()
KMSAN reported an uninit-value access in vxlan_vnifilter_dump() [1].
If the length of the netlink message payload is less than
sizeof(struct tunnel_msg), vxlan_vnifilter_dump() accesses bytes
beyond the message. This can lead to uninit-value access. Fix this by
returning an error in such situations.
[1]
BUG: KMSAN: uninit-value in vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422
vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422
rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6786
netlink_dump+0x93e/0x15f0 net/netlink/af_netlink.c:2317
__netlink_dump_start+0x716/0xd60 net/netlink/af_netlink.c:2432
netlink_dump_start include/linux/netlink.h:340 [inline]
rtnetlink_dump_start net/core/rtnetlink.c:6815 [inline]
rtnetlink_rcv_msg+0x1256/0x14a0 net/core/rtnetlink.c:6882
netlink_rcv_skb+0x467/0x660 net/netlink/af_netlink.c:2542
rtnetlink_rcv+0x35/0x40 net/core/rtnetlink.c:6944
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0xed6/0x1290 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x1092/0x1230 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:726
____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583
___sys_sendmsg+0x271/0x3b0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672
x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4110 [inline]
slab_alloc_node mm/slub.c:4153 [inline]
kmem_cache_alloc_node_noprof+0x800/0xe80 mm/slub.c:4205
kmalloc_reserve+0x13b/0x4b0 net/core/skbuff.c:587
__alloc_skb+0x347/0x7d0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1323 [inline]
netlink_alloc_large_skb+0xa5/0x280 net/netlink/af_netlink.c:1196
netlink_sendmsg+0xac9/0x1230 net/netlink/af_netlink.c:1866
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:726
____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583
___sys_sendmsg+0x271/0x3b0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672
x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 30991 Comm: syz.4.10630 Not tainted 6.12.0-10694-gc44daa7e3c73 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
net: davicom: fix UAF in dm9000_drv_remove
dm is netdev private data and it cannot be
used after free_netdev() call. Using dm after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
This is similar to the issue fixed in commit
ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove").
This bug is detected by our static analysis tool. |
