| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An authenticated user with read-only privileges can cause the mongod process to terminate abnormally by issuing a crafted aggregation command, resulting in denial of service for all connected clients until the process is restarted. The issue stems from an internal engine selection inconsistency triggered by a specific combination of aggregation options. |
| The `$_internalIndexKey` aggregation expression can be used by any authenticated user to crash a MongoDB server (mongod). The expression fails to handle compound wildcard index specifications, triggering an internal consistency check that aborts the server process. The user must be able to run an aggregation pipeline. |
| An authenticated user with basic write privileges can cause the mongod process to terminate abnormally by sending a crafted transaction command with an incomplete set of required fields. The issue stems from inconsistent validation across related transaction command parameters, resulting in a fatal internal invariant failure and denial of service. |
| During query planning when reading the sort pattern in raw BSONObj form, in some places we don’t explicitly handle the meta expression case. This may lead to incorrect transformations leading to invariant failure. |
| If BIND encounters a particular invalid data structure in a DNS record, it will accept the invalid data, and may subsequently abort and exit.
BIND will first need to store a DNS record for a key (KEY, DNSKEY, etc.). That key must specify a PRIVATEDNS algorithm (253), and in the algorithm identifier, improperly give a length longer than the actual identifier data. The invalid identifier will be stored. If BIND later needs to render that record to text, it will use the invalid length during processing, leading to a consistency check failing.
This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1. |
| The issue is unexpected program termination based on ordering and/or specific content in responses to queries for CNAME or DNAME, and A records. Specifically, if a client queries for a DNAME and A record below the DNAME to the resolver, and the authoritative server responds positively to the A query but delays the DNAME response and later responds negatively, `named` may quit unexpectedly. Or, if a client queries for a CNAME and A record for the same name to the resolver, and the authoritative server responds positively to the A query but delays the CNAME response and later responds with a self-referential CNAME, the same failure may occur.
This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1. |
| If a provably insecure domain is covered by both an NSEC and NSEC3 record at the parent, and there exist an RRSIG for only one of these types, then BIND may exit unexpectedly with an assertion while validating this proof.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1. |
| Reachable Assertion (CWE-617) in Elasticsearch can lead to denial of service via Input Data Manipulation (CAPEC-153). A specially crafted search request containing a null value in a specific query clause causes an internal assertion to be raised during query parsing. Because Elasticsearch treats assertion failures as fatal errors, this terminates the affected node process. A low-privileged authenticated user with read access to at least one index can exploit this condition with a single request to cause a node to terminate, disrupting search availability. In a single-node deployment this fully stops Elasticsearch; in a multi-node cluster it reduces cluster capacity for each affected node. |
| The NXP LPUART serial driver (drivers/serial/uart_mcux_lpuart.c), when CONFIG_UART_USE_RUNTIME_CONFIGURE is enabled, called LPUART_Deinit() at the start of mcux_lpuart_configure(), which disables the LPUART peripheral clocks. The requested configuration is validated only afterwards (in mcux_lpuart_configure_basic), and unsupported parity/data-bit/stop-bit/flow-control values return -ENOTSUP before the clock is re-enabled.
As a result, a uart_configure() request with an unsupported configuration left the LPUART in a clock-disabled state; any subsequent access to LPUART registers (poll_out/poll_in, interrupt handling, or a later reconfigure) faults on the gated peripheral and escalates to a hard fault, crashing the system.
uart_configure() is a Zephyr syscall whose verifier (z_vrfy_uart_configure) only checks that cfg is readable user memory and forwards the caller-supplied configuration unchanged, so an unprivileged userspace thread with access to an LPUART device can deterministically trigger the fault, a persistent system-wide denial of service.
Introduced in v2.5.0 and present in all subsequent releases until this fix, which removes the LPUART_Deinit() call and instead only disables the transmitter/receiver, leaving the clock running. |
| No description is available for this CVE. |
| A flaw was found in the QEMU Guest Agent (qga). A local unprivileged user can exploit a vulnerability in the guest-ssh-add-authorized-keys command handler by manipulating symbolic links. This can occur either through a deterministic directory-symlink bypass or a Time-of-Check to Time-of-Use (TOCTOU) file-symlink race. Successful exploitation allows the attacker to gain ownership of arbitrary root-owned files or directories, leading to root access. This vulnerability requires an external management layer (e.g., libvirt) to trigger the affected code path. |
| A security vulnerability has been detected in django-oauth django-oauth-toolkit 3.3.0. This issue affects the function _load_id_token of the file oauth2_provider/oauth2_validators.py. The manipulation leads to session expiration. The attack can be initiated remotely. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix driver-set TX rates on old devices
On old devices such as 7265D, rates are still encoded in version 1
format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but
rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.)
While introducing v3 rates, I changed the driver from internally
handling v1 rates and converting to v2, to internally handling v3
and converting to v1 or v2 according to the firmware. I accordingly
changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer
have different values for different APIs. This was correct.
However, I later reverted this part of the change, because it was
reported that I had broken beacon rates, causing a FW assert/crash.
This caused TX_CMD rates to be set incorrectly, potentially causing
a warning when reported back from the device as having been used.
Fix this (hopefully correctly now) by handling beacon rates in the
TX_CMD that's embedded in the beacon template command separately.
Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate
index, not PLCP value, fixing the real TX_CMD. |
| WireGuard Easy through 15.3.0, fixed in commit 66b292b, contains a cryptographically weak one-time link token generation vulnerability that allows unauthenticated network attackers to recover WireGuard peer credentials by brute-forcing a keyspace of at most 1000 candidate tokens per client ID, as the token is computed using CRC32 over a random value constrained to 0-999. Attackers can enumerate candidate tokens against the unauthenticated /cnf/:oneTimeLink route, which lacks rate limiting and does not validate token expiration, to obtain a peer's PrivateKey and PresharedKey and impersonate that peer on the VPN network. |
| bt_sdp_parse_attribute() in subsys/bluetooth/host/classic/sdp.c validated only that the SDP record buffer held the type-marker byte plus the 2-byte attribute ID (a check of buf->len < 3) but then read a fourth byte, the data-element descriptor (type), via net_buf_simple_pull_u8(). Because net_buf_simple_pull_u8() dereferences buf->data[0] before its only bounds guard (an __ASSERT_NO_MSG that compiles out when CONFIG_ASSERT is disabled, the production default), a record of exactly three bytes (0x09 followed by a 2-byte attribute ID) causes a one-byte read past the end of the logical buffer. The parser is reachable from inbound, remote-controlled data: a Bluetooth BR/EDR peer acting as an SDP server returns discovery-response records that are stored verbatim in the client receive buffer and parsed via the public bt_sdp_get_attr()/bt_sdp_has_attr()/bt_sdp_record_parse() helpers. The over-read is bounded to a single byte that is used only as an internal length selector and is never leaked to the attacker; subsequent length checks then reject the malformed record. Realistic impact is therefore limited to an edge-case denial of service (a fault only if the record ends exactly at a mapped-memory boundary, or a deterministic assert panic when CONFIG_ASSERT=y). Affects Zephyr v4.3.0 and v4.4.0; fixed by adding sizeof(type) to the length check. |
| Quicly is an IETF QUIC protocol implementation intended primarily for use within the H2O HTTP server. Prior to commit 937d0e9, an assertion failure is raised when the total number of valid handshake messages received over a CRYPTO stream of a single packet number space exceeds 32KB, causing a Denial of Service. This issue has been fixed by commit 937d0e9. |
| An issue was discovered in cyrus-imapd in Cyrus IMAP through 3.12.2. URLAUTH does not honor revoked authorizer access. A URLAUTH URL minted while the authorizer had access continued to work after that access was revoked. |
| PlaywrightCapture stored capture-specific configuration and runtime data as mutable class-level variables rather than instance-level variables. Consequently, multiple Capture objects running within the same Python process could share state, including HTTP headers, cookies, browser storage, HTTP credentials, proxy configuration, user-agent settings, geolocation information, and captured request data.
In a multi-user or concurrent deployment, information supplied during one capture could therefore persist and be reused by a subsequent or parallel capture. This could result in the disclosure of authentication cookies, credentials, browser storage, or captured request data belonging to another user. It could also cause requests to be performed with another capture's authentication context, headers, or proxy configuration, potentially enabling unauthorized access to remote resources or interference with other capture operations.
The vulnerability is resolved by initializing all capture-specific settings and request data as instance variables in the Capture constructor, ensuring that state is isolated between capture operations. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.10, org.hl7.fhir.utilities.XsltUtilities saxonTransform(...) overloads instantiated a bare net.sf.saxon.TransformerFactoryImpl() without ACCESS_EXTERNAL_DTD or ACCESS_EXTERNAL_STYLESHEET restrictions, allowing an attacker who controls or can tamper with transformed XML to trigger XML External Entity injection for local file disclosure and blind XXE or SSRF to arbitrary URLs reachable from the host. This issue is fixed in version 6.9.10. |
| open-webui before 0.3.14 contains a cross-origin resource sharing misconfiguration allowing arbitrary origins with allow_origins=* and authenticated requests to the /api/v1/functions endpoint. Attackers can execute arbitrary code on the openwebui instance by crafting malicious cross-site requests from attacker-controlled websites when an admin user visits them. |
