| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: unshare packets when reassembling
Ensure that the frag_list used for reassembly isn't shared with other
packets. This avoids incorrect reassembly when packets are cloned, and
prevents a memory leak due to circular references between fragments and
their skb_shared_info.
The upcoming MCTP-over-USB driver uses skb_clone which can trigger the
problem - other MCTP drivers don't share SKBs.
A kunit test is added to reproduce the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
netmem: prevent TX of unreadable skbs
Currently on stable trees we have support for netmem/devmem RX but not
TX. It is not safe to forward/redirect an RX unreadable netmem packet
into the device's TX path, as the device may call dma-mapping APIs on
dma addrs that should not be passed to it.
Fix this by preventing the xmit of unreadable skbs.
Tested by configuring tc redirect:
sudo tc qdisc add dev eth1 ingress
sudo tc filter add dev eth1 ingress protocol ip prio 1 flower ip_proto \
tcp src_ip 192.168.1.12 action mirred egress redirect dev eth1
Before, I see unreadable skbs in the driver's TX path passed to dma
mapping APIs.
After, I don't see unreadable skbs in the driver's TX path passed to dma
mapping APIs. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix vport QoS cleanup on error
When enabling vport QoS fails, the scheduling node was never freed,
causing a leak.
Add the missing free and reset the vport scheduling node pointer to
NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: Fix refcount leak caused by setting SO_BINDTODEVICE sockopt
If an AX25 device is bound to a socket by setting the SO_BINDTODEVICE
socket option, a refcount leak will occur in ax25_release().
Commit 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
added decrement of device refcounts in ax25_release(). In order for that
to work correctly the refcounts must already be incremented when the
device is bound to the socket. An AX25 device can be bound to a socket
by either calling ax25_bind() or setting SO_BINDTODEVICE socket option.
In both cases the refcounts should be incremented, but in fact it is done
only in ax25_bind().
This bug leads to the following issue reported by Syzkaller:
================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 1 PID: 5932 at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Modules linked in:
CPU: 1 UID: 0 PID: 5932 Comm: syz-executor424 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x710/0x820 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4156 [inline]
netdev_put include/linux/netdevice.h:4173 [inline]
netdev_put include/linux/netdevice.h:4169 [inline]
ax25_release+0x33f/0xa10 net/ax25/af_ax25.c:1069
__sock_release+0xb0/0x270 net/socket.c:640
sock_close+0x1c/0x30 net/socket.c:1408
...
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Fix the implementation of ax25_setsockopt() by adding increment of
refcounts for the new device bound, and decrement of refcounts for
the old unbound device. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
If the XDP program doesn't result in XDP_PASS then we leak the
memory allocated by am65_cpsw_build_skb().
It is pointless to allocate SKB memory before running the XDP
program as we would be wasting CPU cycles for cases other than XDP_PASS.
Move the SKB allocation after evaluating the XDP program result.
This fixes the memleak. A performance boost is seen for XDP_DROP test.
XDP_DROP test:
Before: 460256 rx/s 0 err/s
After: 784130 rx/s 0 err/s |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: virtuser: fix missing lookup table cleanups
When a virtuser device is created via configfs and the probe fails due
to an incorrect lookup table, the table is not removed. This prevents
subsequent probe attempts from succeeding, even if the issue is
corrected, unless the device is released. Additionally, cleanup is also
needed in the less likely case of platform_device_register_full()
failure.
Besides, a consistent memory leak in lookup_table->dev_id was spotted
using kmemleak by toggling the live state between 0 and 1 with a correct
lookup table.
Introduce gpio_virtuser_remove_lookup_table() as the counterpart to the
existing gpio_virtuser_make_lookup_table() and call it from all
necessary points to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix freeing of PMD-sized vmemmap pages
Commit bf9e4e30f353 ("x86/mm: use pagetable_free()"), switched from
freeing non-boot page tables through __free_pages() to
pagetable_free().
However, the function is also called to free vmemmap pages.
Given that vmemmap pages are not page tables, already the page_ptdesc(page)
is wrong. But worse, pagetable_free() calls:
__free_pages(page, compound_order(page));
Since vmemmap pages are not compound pages (see vmemmap_alloc_block())
-- except for HVO, which doesn't apply here -- only first page of a
PMD-sized vmemmap page is freed, leaking the other ones.
Fix it by properly decoupling pagetable and vmemmap freeing.
free_pagetable() no longer has to mess with SECTION_INFO, as only the
vmemmap is marked like that in register_page_bootmem_memmap().
The indentation in remove_pmd_table() is messed up. Fix that while
touching it.
Bootmem info handling will soon be fixed up. For now, handle it
similar to free_pagetable(), just avoiding the ifdef.
[ dhansen: changelog munging. More imperative voice ] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SEV firmware docs for SNP_VLEK_LOAD note:
> On SNP_SHUTDOWN, the VLEK is deleted.
That is, the initialization/shutdown wrapper here is pointless, because the
firmware immediately throws away the key anyway. Instead, refuse to do
anything if SNP has not been previously initialized.
This is an ABI break: before, this was a no-op and almost certainly a
mistake by userspace, and now it returns -ENODEV. ABI compatibility could be
maintained here by simply returning 0 in the check instead. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix next buffer leak in receive_encrypted_standard()
receive_encrypted_standard() allocates next_buffer before checking
whether the number of compound PDUs already reached MAX_COMPOUND. If
the limit check fails, the function returns immediately and the newly
allocated next_buffer is not assigned to server->smallbuf/server->bigbuf,
making it leaked.
Move the MAX_COMPOUND check before allocating next_buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
rt1711h_probe() registers the TCPCI port before requesting the interrupt
and enabling alert interrupts. If either of those later steps fails, the
probe function returns without unregistering the TCPCI port. The explicit
unregister currently only happens from the remove callback.
Register a devres action immediately after tcpci_register_port() succeeds,
so tcpci_unregister_port() runs on later probe failures and on driver
detach. Drop the remove callback to avoid unregistering the same port
twice.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| A denial of service issue was addressed by removing the vulnerable code. This issue is fixed in macOS Tahoe 26.6. A local attacker may be able to cause a denial of service. |
| A buffer overflow was addressed with improved bounds checking. This issue is fixed in iOS 26.5.2 and iPadOS 26.5.2, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. A malicious accessory may be able to cause unexpected app termination. |
| The issue was addressed with improved memory handling. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to cause unexpected system termination. |
| This issue was addressed through improved state management. This issue is fixed in Safari 26.6, iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, visionOS 26.6. Visiting a website may lead to an app denial-of-service. |
| MCP Ruby SDK is the official Ruby SDK for Model Context Protocol servers and clients. Prior to 0.23.0, MCP::Server::Transports::StdioTransport and MCP::Client::Stdio in the mcp gem use IO#gets without a byte limit, allowing a peer that sends data without a newline to exhaust process memory. This issue is fixed in version 0.23.0. |
| IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.7 are affected by a denial of service vulnerability in the HTTP channel due to unbounded allocation of resources without limits. |
| The following Poly Voice IP devices, CCX, Trio, and Edge E, might be inoperable if they connect to a malicious SIP server and receive malformed data. HP is releasing updates to mitigate these potential vulnerabilities. |
| Uncontrolled Resource Consumption vulnerability in the HTTP/1.1 message parser in Apache HttpComponents Core (5.4.2 and earlier, 5.5-beta1 and earlier) allows an remote attacker to cause a denial of service through memory exhaustion by sending messages with excessive number of headers / excessive header length |
| Allocation of resources without limits or throttling in the HTTP/2 HPACK decoder in Apache HttpComponents Core (5.4.2 and earlier, 5.5-beta1 and earlier) allows an remote attacker to cause a denial of service through memory exhaustion by sending oversized compressed header blocks before the HTTP/2 SETTINGS acknowledgement causes the configured header list size limit to be applied. |
| Dompdf is an HTML to PDF converter for PHP. Versions 3.15 and prior are vulnerable to a Denial of Service (DoS) attack via resource exhaustion. An attacker can crash the PHP process by providing a specially crafted HTML document containing a single image with massive dimensions (e.g., 30,000x30,000 pixels). While Dompdf implements internal checks to validate image dimensions, these can be bypassed by using a high-entropy image (such as random noise) encoded in Base64 and wrapped in specific CSS containers. The vulnerability exists because the dimension validation happens early, but the resource allocation for calculating the object's bounding box and internal buffers during the rendering phase does not strictly limit the cumulative CPU time or memory usage for a single object that has passed the initial check. An unauthenticated remote attacker can cause a complete Denial of Service on the web server by submitting a crafted HTML string. This affects any application that allows users to provide HTML content or URLs that are subsequently converted to PDF using Dompdf. This issue has been fixed in version 3.16. |
