| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/tls: fix kernel panic when alloc_page failed
We cannot set frag_list to NULL pointer when alloc_page failed.
It will be used in tls_strp_check_queue_ok when the next time
tls_strp_read_sock is called.
This is because we don't reset full_len in tls_strp_flush_anchor_copy()
so the recv path will try to continue handling the partial record
on the next call but we dettached the rcvq from the frag list.
Alternative fix would be to reset full_len.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000028
Call trace:
tls_strp_check_rcv+0x128/0x27c
tls_strp_data_ready+0x34/0x44
tls_data_ready+0x3c/0x1f0
tcp_data_ready+0x9c/0xe4
tcp_data_queue+0xf6c/0x12d0
tcp_rcv_established+0x52c/0x798 |
| In the Linux kernel, the following vulnerability has been resolved:
xenbus: Use kref to track req lifetime
Marek reported seeing a NULL pointer fault in the xenbus_thread
callstack:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: e030:__wake_up_common+0x4c/0x180
Call Trace:
<TASK>
__wake_up_common_lock+0x82/0xd0
process_msg+0x18e/0x2f0
xenbus_thread+0x165/0x1c0
process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a
thin wrapper around wake_up(), or xenbus_dev_queue_reply(). It seems
like it was xs_wake_up() in this case.
It seems like req may have woken up the xs_wait_for_reply(), which
kfree()ed the req. When xenbus_thread resumes, it faults on the zero-ed
data.
Linux Device Drivers 2nd edition states:
"Normally, a wake_up call can cause an immediate reschedule to happen,
meaning that other processes might run before wake_up returns."
... which would match the behaviour observed.
Change to keeping two krefs on each request. One for the caller, and
one for xenbus_thread. Each will kref_put() when finished, and the last
will free it.
This use of kref matches the description in
Documentation/core-api/kref.rst |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Verify event formats that have "%*p.."
The trace event verifier checks the formats of trace events to make sure
that they do not point at memory that is not in the trace event itself or
in data that will never be freed. If an event references data that was
allocated when the event triggered and that same data is freed before the
event is read, then the kernel can crash by reading freed memory.
The verifier runs at boot up (or module load) and scans the print formats
of the events and checks their arguments to make sure that dereferenced
pointers are safe. If the format uses "%*p.." the verifier will ignore it,
and that could be dangerous. Cover this case as well.
Also add to the sample code a use case of "%*pbl". |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue()
A NULL pointer dereference can occur in skb_dequeue() when processing a
QCA firmware crash dump on WCN7851 (0489:e0f3).
[ 93.672166] Bluetooth: hci0: ACL memdump size(589824)
[ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth]
[ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80
The issue stems from handle_dump_pkt_qca() returning 0 even when a dump
packet is successfully processed. This is because it incorrectly
forwards the return value of hci_devcd_init() (which returns 0 on
success). As a result, the caller (btusb_recv_acl_qca() or
btusb_recv_evt_qca()) assumes the packet was not handled and passes it
to hci_recv_frame(), leading to premature kfree() of the skb.
Later, hci_devcd_rx() attempts to dequeue the same skb from the dump
queue, resulting in a NULL pointer dereference.
Fix this by:
1. Making handle_dump_pkt_qca() return 0 on success and negative errno
on failure, consistent with kernel conventions.
2. Splitting dump packet detection into separate functions for ACL
and event packets for better structure and readability.
This ensures dump packets are properly identified and consumed, avoiding
double handling and preventing NULL pointer access. |
| In the Linux kernel, the following vulnerability has been resolved:
net: use sock_gen_put() when sk_state is TCP_TIME_WAIT
It is possible for a pointer of type struct inet_timewait_sock to be
returned from the functions __inet_lookup_established() and
__inet6_lookup_established(). This can cause a crash when the
returned pointer is of type struct inet_timewait_sock and
sock_put() is called on it. The following is a crash call stack that
shows sk->sk_wmem_alloc being accessed in sk_free() during the call to
sock_put() on a struct inet_timewait_sock pointer. To avoid this issue,
use sock_gen_put() instead of sock_put() when sk->sk_state
is TCP_TIME_WAIT.
mrdump.ko ipanic() + 120
vmlinux notifier_call_chain(nr_to_call=-1, nr_calls=0) + 132
vmlinux atomic_notifier_call_chain(val=0) + 56
vmlinux panic() + 344
vmlinux add_taint() + 164
vmlinux end_report() + 136
vmlinux kasan_report(size=0) + 236
vmlinux report_tag_fault() + 16
vmlinux do_tag_recovery() + 16
vmlinux __do_kernel_fault() + 88
vmlinux do_bad_area() + 28
vmlinux do_tag_check_fault() + 60
vmlinux do_mem_abort() + 80
vmlinux el1_abort() + 56
vmlinux el1h_64_sync_handler() + 124
vmlinux > 0xFFFFFFC080011294()
vmlinux __lse_atomic_fetch_add_release(v=0xF2FFFF82A896087C)
vmlinux __lse_atomic_fetch_sub_release(v=0xF2FFFF82A896087C)
vmlinux arch_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux raw_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8
vmlinux __refcount_sub_and_test(i=1, r=0xF2FFFF82A896087C,
oldp=0) + 8
vmlinux __refcount_dec_and_test(r=0xF2FFFF82A896087C, oldp=0) + 8
vmlinux refcount_dec_and_test(r=0xF2FFFF82A896087C) + 8
vmlinux sk_free(sk=0xF2FFFF82A8960700) + 28
vmlinux sock_put() + 48
vmlinux tcp6_check_fraglist_gro() + 236
vmlinux tcp6_gro_receive() + 624
vmlinux ipv6_gro_receive() + 912
vmlinux dev_gro_receive() + 1116
vmlinux napi_gro_receive() + 196
ccmni.ko ccmni_rx_callback() + 208
ccmni.ko ccmni_queue_recv_skb() + 388
ccci_dpmaif.ko dpmaif_rxq_push_thread() + 1088
vmlinux kthread() + 268
vmlinux 0xFFFFFFC08001F30C() |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: make wait_context part of q_info
Make the wait_context a full part of the q_info struct rather
than a stack variable that goes away after pdsc_adminq_post()
is done so that the context is still available after the wait
loop has given up.
There was a case where a slow development firmware caused
the adminq request to time out, but then later the FW finally
finished the request and sent the interrupt. The handler tried
to complete_all() the completion context that had been created
on the stack in pdsc_adminq_post() but no longer existed.
This caused bad pointer usage, kernel crashes, and much wailing
and gnashing of teeth. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Only create /proc/fs/netfs with CONFIG_PROC_FS
When testing a special config:
CONFIG_NETFS_SUPPORTS=y
CONFIG_PROC_FS=n
The system crashes with something like:
[ 3.766197] ------------[ cut here ]------------
[ 3.766484] kernel BUG at mm/mempool.c:560!
[ 3.766789] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 3.767123] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W
[ 3.767777] Tainted: [W]=WARN
[ 3.767968] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
[ 3.768523] RIP: 0010:mempool_alloc_slab.cold+0x17/0x19
[ 3.768847] Code: 50 fe ff 58 5b 5d 41 5c 41 5d 41 5e 41 5f e9 93 95 13 00
[ 3.769977] RSP: 0018:ffffc90000013998 EFLAGS: 00010286
[ 3.770315] RAX: 000000000000002f RBX: ffff888100ba8640 RCX: 0000000000000000
[ 3.770749] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 00000000ffffffff
[ 3.771217] RBP: 0000000000092880 R08: 0000000000000000 R09: ffffc90000013828
[ 3.771664] R10: 0000000000000001 R11: 00000000ffffffea R12: 0000000000092cc0
[ 3.772117] R13: 0000000000000400 R14: ffff8881004b1620 R15: ffffea0004ef7e40
[ 3.772554] FS: 0000000000000000(0000) GS:ffff8881b5f3c000(0000) knlGS:0000000000000000
[ 3.773061] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.773443] CR2: ffffffff830901b4 CR3: 0000000004296001 CR4: 0000000000770ef0
[ 3.773884] PKRU: 55555554
[ 3.774058] Call Trace:
[ 3.774232] <TASK>
[ 3.774371] mempool_alloc_noprof+0x6a/0x190
[ 3.774649] ? _printk+0x57/0x80
[ 3.774862] netfs_alloc_request+0x85/0x2ce
[ 3.775147] netfs_readahead+0x28/0x170
[ 3.775395] read_pages+0x6c/0x350
[ 3.775623] ? srso_alias_return_thunk+0x5/0xfbef5
[ 3.775928] page_cache_ra_unbounded+0x1bd/0x2a0
[ 3.776247] filemap_get_pages+0x139/0x970
[ 3.776510] ? srso_alias_return_thunk+0x5/0xfbef5
[ 3.776820] filemap_read+0xf9/0x580
[ 3.777054] ? srso_alias_return_thunk+0x5/0xfbef5
[ 3.777368] ? srso_alias_return_thunk+0x5/0xfbef5
[ 3.777674] ? find_held_lock+0x32/0x90
[ 3.777929] ? netfs_start_io_read+0x19/0x70
[ 3.778221] ? netfs_start_io_read+0x19/0x70
[ 3.778489] ? srso_alias_return_thunk+0x5/0xfbef5
[ 3.778800] ? lock_acquired+0x1e6/0x450
[ 3.779054] ? srso_alias_return_thunk+0x5/0xfbef5
[ 3.779379] netfs_buffered_read_iter+0x57/0x80
[ 3.779670] __kernel_read+0x158/0x2c0
[ 3.779927] bprm_execve+0x300/0x7a0
[ 3.780185] kernel_execve+0x10c/0x140
[ 3.780423] ? __pfx_kernel_init+0x10/0x10
[ 3.780690] kernel_init+0xd5/0x150
[ 3.780910] ret_from_fork+0x2d/0x50
[ 3.781156] ? __pfx_kernel_init+0x10/0x10
[ 3.781414] ret_from_fork_asm+0x1a/0x30
[ 3.781677] </TASK>
[ 3.781823] Modules linked in:
[ 3.782065] ---[ end trace 0000000000000000 ]---
This is caused by the following error path in netfs_init():
if (!proc_mkdir("fs/netfs", NULL))
goto error_proc;
Fix this by adding ifdef in netfs_main(), so that /proc/fs/netfs is only
created with CONFIG_PROC_FS. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netfront: handle NULL returned by xdp_convert_buff_to_frame()
The function xdp_convert_buff_to_frame() may return NULL if it fails
to correctly convert the XDP buffer into an XDP frame due to memory
constraints, internal errors, or invalid data. Failing to check for NULL
may lead to a NULL pointer dereference if the result is used later in
processing, potentially causing crashes, data corruption, or undefined
behavior.
On XDP redirect failure, the associated page must be released explicitly
if it was previously retained via get_page(). Failing to do so may result
in a memory leak, as the pages reference count is not decremented. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Fix invalid pointer dereference in Etron workaround
This check is performed before prepare_transfer() and prepare_ring(), so
enqueue can already point at the final link TRB of a segment. And indeed
it will, some 0.4% of times this code is called.
Then enqueue + 1 is an invalid pointer. It will crash the kernel right
away or load some junk which may look like a link TRB and cause the real
link TRB to be replaced with a NOOP. This wouldn't end well.
Use a functionally equivalent test which doesn't dereference the pointer
and always gives correct result.
Something has crashed my machine twice in recent days while playing with
an Etron HC, and a control transfer stress test ran for confirmation has
just crashed it again. The same test passes with this patch applied. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-imx: Add check for spi_imx_setupxfer()
Add check for the return value of spi_imx_setupxfer().
spi_imx->rx and spi_imx->tx function pointer can be NULL when
spi_imx_setupxfer() return error, and make NULL pointer dereference.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
0x0
spi_imx_pio_transfer+0x50/0xd8
spi_imx_transfer_one+0x18c/0x858
spi_transfer_one_message+0x43c/0x790
__spi_pump_transfer_message+0x238/0x5d4
__spi_sync+0x2b0/0x454
spi_write_then_read+0x11c/0x200 |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: fix potential NULL pointer dereference in dev_uevent()
If userspace reads "uevent" device attribute at the same time as another
threads unbinds the device from its driver, change to dev->driver from a
valid pointer to NULL may result in crash. Fix this by using READ_ONCE()
when fetching the pointer, and take bus' drivers klist lock to make sure
driver instance will not disappear while we access it.
Use WRITE_ONCE() when setting the driver pointer to ensure there is no
tearing. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix NULL pointer in can_accept_new_subflow
When testing valkey benchmark tool with MPTCP, the kernel panics in
'mptcp_can_accept_new_subflow' because subflow_req->msk is NULL.
Call trace:
mptcp_can_accept_new_subflow (./net/mptcp/subflow.c:63 (discriminator 4)) (P)
subflow_syn_recv_sock (./net/mptcp/subflow.c:854)
tcp_check_req (./net/ipv4/tcp_minisocks.c:863)
tcp_v4_rcv (./net/ipv4/tcp_ipv4.c:2268)
ip_protocol_deliver_rcu (./net/ipv4/ip_input.c:207)
ip_local_deliver_finish (./net/ipv4/ip_input.c:234)
ip_local_deliver (./net/ipv4/ip_input.c:254)
ip_rcv_finish (./net/ipv4/ip_input.c:449)
...
According to the debug log, the same req received two SYN-ACK in a very
short time, very likely because the client retransmits the syn ack due
to multiple reasons.
Even if the packets are transmitted with a relevant time interval, they
can be processed by the server on different CPUs concurrently). The
'subflow_req->msk' ownership is transferred to the subflow the first,
and there will be a risk of a null pointer dereference here.
This patch fixes this issue by moving the 'subflow_req->msk' under the
`own_req == true` conditional.
Note that the !msk check in subflow_hmac_valid() can be dropped, because
the same check already exists under the own_req mpj branch where the
code has been moved to. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
Commit 176cda0619b6 ("powerpc/perf: Add perf interface to expose vpa
counters") introduced 'vpa_pmu' to expose Book3s-HV nested APIv2 provided
L1<->L2 context switch latency counters to L1 user-space via
perf-events. However the newly introduced PMU named 'vpa_pmu' doesn't
assign ownership of the PMU to the module 'vpa_pmu'. Consequently the
module 'vpa_pmu' can be unloaded while one of the perf-events are still
active, which can lead to kernel oops and panic of the form below on a
Pseries-LPAR:
BUG: Kernel NULL pointer dereference on read at 0x00000058
<snip>
NIP [c000000000506cb8] event_sched_out+0x40/0x258
LR [c00000000050e8a4] __perf_remove_from_context+0x7c/0x2b0
Call Trace:
[c00000025fc3fc30] [c00000025f8457a8] 0xc00000025f8457a8 (unreliable)
[c00000025fc3fc80] [fffffffffffffee0] 0xfffffffffffffee0
[c00000025fc3fcd0] [c000000000501e70] event_function+0xa8/0x120
<snip>
Kernel panic - not syncing: Aiee, killing interrupt handler!
Fix this by adding the module ownership to 'vpa_pmu' so that the module
'vpa_pmu' is ref-counted and prevented from being unloaded when perf-events
are initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Don't expose hw_counters outside of init net namespace
Commit 467f432a521a ("RDMA/core: Split port and device counter sysfs
attributes") accidentally almost exposed hw counters to non-init net
namespaces. It didn't expose them fully, as an attempt to read any of
those counters leads to a crash like this one:
[42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028
[42021.814463] #PF: supervisor read access in kernel mode
[42021.819549] #PF: error_code(0x0000) - not-present page
[42021.824636] PGD 0 P4D 0
[42021.827145] Oops: 0000 [#1] SMP PTI
[42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX
[42021.841697] Hardware name: XXX
[42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff <48> 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48
[42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287
[42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000
[42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0
[42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000
[42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530
[42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000
[42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000
[42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0
[42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[42021.949324] Call Trace:
[42021.951756] <TASK>
[42021.953842] [<ffffffff86c58674>] ? show_regs+0x64/0x70
[42021.959030] [<ffffffff86c58468>] ? __die+0x78/0xc0
[42021.963874] [<ffffffff86c9ef75>] ? page_fault_oops+0x2b5/0x3b0
[42021.969749] [<ffffffff87674b92>] ? exc_page_fault+0x1a2/0x3c0
[42021.975549] [<ffffffff87801326>] ? asm_exc_page_fault+0x26/0x30
[42021.981517] [<ffffffffc0775680>] ? __pfx_show_hw_stats+0x10/0x10 [ib_core]
[42021.988482] [<ffffffffc077564e>] ? hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.995438] [<ffffffff86ac7f8e>] dev_attr_show+0x1e/0x50
[42022.000803] [<ffffffff86a3eeb1>] sysfs_kf_seq_show+0x81/0xe0
[42022.006508] [<ffffffff86a11134>] seq_read_iter+0xf4/0x410
[42022.011954] [<ffffffff869f4b2e>] vfs_read+0x16e/0x2f0
[42022.017058] [<ffffffff869f50ee>] ksys_read+0x6e/0xe0
[42022.022073] [<ffffffff8766f1ca>] do_syscall_64+0x6a/0xa0
[42022.027441] [<ffffffff8780013b>] entry_SYSCALL_64_after_hwframe+0x78/0xe2
The problem can be reproduced using the following steps:
ip netns add foo
ip netns exec foo bash
cat /sys/class/infiniband/mlx4_0/hw_counters/*
The panic occurs because of casting the device pointer into an
ib_device pointer using container_of() in hw_stat_device_show() is
wrong and leads to a memory corruption.
However the real problem is that hw counters should never been exposed
outside of the non-init net namespace.
Fix this by saving the index of the corresponding attribute group
(it might be 1 or 2 depending on the presence of driver-specific
attributes) and zeroing the pointer to hw_counters group for compat
devices during the initialization.
With this fix applied hw_counters are not available in a non-init
net namespace:
find /sys/class/infiniband/mlx4_0/ -name hw_counters
/sys/class/infiniband/mlx4_0/ports/1/hw_counters
/sys/class/infiniband/mlx4_0/ports/2/hw_counters
/sys/class/infiniband/mlx4_0/hw_counters
ip netns add foo
ip netns exec foo bash
find /sys/class/infiniband/mlx4_0/ -name hw_counters |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
When cur_qp isn't NULL, in order to avoid fetching the QP from
the radix tree again we check if the next cqe QP is identical to
the one we already have.
The bug however is that we are checking if the QP is identical by
checking the QP number inside the CQE against the QP number inside the
mlx5_ib_qp, but that's wrong since the QP number from the CQE is from
FW so it should be matched against mlx5_core_qp which is our FW QP
number.
Otherwise we could use the wrong QP when handling a CQE which could
cause the kernel trace below.
This issue is mainly noticeable over QPs 0 & 1, since for now they are
the only QPs in our driver whereas the QP number inside mlx5_ib_qp
doesn't match the QP number inside mlx5_core_qp.
BUG: kernel NULL pointer dereference, address: 0000000000000012
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib]
Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 <0f> b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21
RSP: 0018:ffff88810511bd60 EFLAGS: 00010046
RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a
RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000
R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0
FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib]
__ib_process_cq+0x5a/0x150 [ib_core]
ib_cq_poll_work+0x31/0x90 [ib_core]
process_one_work+0x169/0x320
worker_thread+0x288/0x3a0
? work_busy+0xb0/0xb0
kthread+0xd7/0x1f0
? kthreads_online_cpu+0x130/0x130
? kthreads_online_cpu+0x130/0x130
ret_from_fork+0x2d/0x50
? kthreads_online_cpu+0x130/0x130
ret_from_fork_asm+0x11/0x20
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: add mutual exclusion in proc_sctp_do_udp_port()
We must serialize calls to sctp_udp_sock_stop() and sctp_udp_sock_start()
or risk a crash as syzbot reported:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000d: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 1 UID: 0 PID: 6551 Comm: syz.1.44 Not tainted 6.14.0-syzkaller-g7f2ff7b62617 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
RIP: 0010:kernel_sock_shutdown+0x47/0x70 net/socket.c:3653
Call Trace:
<TASK>
udp_tunnel_sock_release+0x68/0x80 net/ipv4/udp_tunnel_core.c:181
sctp_udp_sock_stop+0x71/0x160 net/sctp/protocol.c:930
proc_sctp_do_udp_port+0x264/0x450 net/sctp/sysctl.c:553
proc_sys_call_handler+0x3d0/0x5b0 fs/proc/proc_sysctl.c:601
iter_file_splice_write+0x91c/0x1150 fs/splice.c:738
do_splice_from fs/splice.c:935 [inline]
direct_splice_actor+0x18f/0x6c0 fs/splice.c:1158
splice_direct_to_actor+0x342/0xa30 fs/splice.c:1102
do_splice_direct_actor fs/splice.c:1201 [inline]
do_splice_direct+0x174/0x240 fs/splice.c:1227
do_sendfile+0xafd/0xe50 fs/read_write.c:1368
__do_sys_sendfile64 fs/read_write.c:1429 [inline]
__se_sys_sendfile64 fs/read_write.c:1415 [inline]
__x64_sys_sendfile64+0x1d8/0x220 fs/read_write.c:1415
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in alloc_preauth_hash()
The Client send malformed smb2 negotiate request. ksmbd return error
response. Subsequently, the client can send smb2 session setup even
thought conn->preauth_info is not allocated.
This patch add KSMBD_SESS_NEED_SETUP status of connection to ignore
session setup request if smb2 negotiate phase is not complete. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate: fix shmem xarray update during migration
A shmem folio can be either in page cache or in swap cache, but not at the
same time. Namely, once it is in swap cache, folio->mapping should be
NULL, and the folio is no longer in a shmem mapping.
In __folio_migrate_mapping(), to determine the number of xarray entries to
update, folio_test_swapbacked() is used, but that conflates shmem in page
cache case and shmem in swap cache case. It leads to xarray multi-index
entry corruption, since it turns a sibling entry to a normal entry during
xas_store() (see [1] for a userspace reproduction). Fix it by only using
folio_test_swapcache() to determine whether xarray is storing swap cache
entries or not to choose the right number of xarray entries to update.
[1] https://lore.kernel.org/linux-mm/Z8idPCkaJW1IChjT@casper.infradead.org/
Note:
In __split_huge_page(), folio_test_anon() && folio_test_swapcache() is
used to get swap_cache address space, but that ignores the shmem folio in
swap cache case. It could lead to NULL pointer dereferencing when a
in-swap-cache shmem folio is split at __xa_store(), since
!folio_test_anon() is true and folio->mapping is NULL. But fortunately,
its caller split_huge_page_to_list_to_order() bails out early with EBUSY
when folio->mapping is NULL. So no need to take care of it here. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Bridge, fix the crash caused by LAG state check
When removing LAG device from bridge, NETDEV_CHANGEUPPER event is
triggered. Driver finds the lower devices (PFs) to flush all the
offloaded entries. And mlx5_lag_is_shared_fdb is checked, it returns
false if one of PF is unloaded. In such case,
mlx5_esw_bridge_lag_rep_get() and its caller return NULL, instead of
the alive PF, and the flush is skipped.
Besides, the bridge fdb entry's lastuse is updated in mlx5 bridge
event handler. But this SWITCHDEV_FDB_ADD_TO_BRIDGE event can be
ignored in this case because the upper interface for bond is deleted,
and the entry will never be aged because lastuse is never updated.
To make things worse, as the entry is alive, mlx5 bridge workqueue
keeps sending that event, which is then handled by kernel bridge
notifier. It causes the following crash when accessing the passed bond
netdev which is already destroyed.
To fix this issue, remove such checks. LAG state is already checked in
commit 15f8f168952f ("net/mlx5: Bridge, verify LAG state when adding
bond to bridge"), driver still need to skip offload if LAG becomes
invalid state after initialization.
Oops: stack segment: 0000 [#1] SMP
CPU: 3 UID: 0 PID: 23695 Comm: kworker/u40:3 Tainted: G OE 6.11.0_mlnx #1
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_bridge_wq mlx5_esw_bridge_update_work [mlx5_core]
RIP: 0010:br_switchdev_event+0x2c/0x110 [bridge]
Code: 44 00 00 48 8b 02 48 f7 00 00 02 00 00 74 69 41 54 55 53 48 83 ec 08 48 8b a8 08 01 00 00 48 85 ed 74 4a 48 83 fe 02 48 89 d3 <4c> 8b 65 00 74 23 76 49 48 83 fe 05 74 7e 48 83 fe 06 75 2f 0f b7
RSP: 0018:ffffc900092cfda0 EFLAGS: 00010297
RAX: ffff888123bfe000 RBX: ffffc900092cfe08 RCX: 00000000ffffffff
RDX: ffffc900092cfe08 RSI: 0000000000000001 RDI: ffffffffa0c585f0
RBP: 6669746f6e690a30 R08: 0000000000000000 R09: ffff888123ae92c8
R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888123ae9c60
R13: 0000000000000001 R14: ffffc900092cfe08 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f15914c8734 CR3: 0000000002830005 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? die+0x38/0x60
? do_trap+0x10b/0x120
? do_error_trap+0x64/0xa0
? exc_stack_segment+0x33/0x50
? asm_exc_stack_segment+0x22/0x30
? br_switchdev_event+0x2c/0x110 [bridge]
? sched_balance_newidle.isra.149+0x248/0x390
notifier_call_chain+0x4b/0xa0
atomic_notifier_call_chain+0x16/0x20
mlx5_esw_bridge_update+0xec/0x170 [mlx5_core]
mlx5_esw_bridge_update_work+0x19/0x40 [mlx5_core]
process_scheduled_works+0x81/0x390
worker_thread+0x106/0x250
? bh_worker+0x110/0x110
kthread+0xb7/0xe0
? kthread_park+0x80/0x80
ret_from_fork+0x2d/0x50
? kthread_park+0x80/0x80
ret_from_fork_asm+0x11/0x20
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Validate prev_cpu in scx_bpf_select_cpu_dfl()
If a BPF scheduler provides an invalid CPU (outside the nr_cpu_ids
range) as prev_cpu to scx_bpf_select_cpu_dfl() it can cause a kernel
crash.
To prevent this, validate prev_cpu in scx_bpf_select_cpu_dfl() and
trigger an scx error if an invalid CPU is specified. |
