| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### 2wayAudio command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### audio command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### disconnect command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### play command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
#### pause command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
### saveVideo command index-out-of-bound
When sending the `saveVideo` command, the `index` field is extracted from the websocket message [1]. Then without checking the range of the index, it is used to trigger a CriticalSection ([2]) and releases it [3]. The release function call ([3]) is executed using a function pointer which will be read out of bounds potentially leading to code execution:
v6 = get_entry(a2, "index");
result = json_is_value_int(v6);
if ( (_BYTE)result )
{
v8 = get_entry(a2, "index");
index = json_value_to_int(&v8->value); // [1]
result = CCriticalSection::EnterCritSection(&this->crit_sections[index]); //[2]
if ( result )
{
if ( this->array_of_IPCams[index] )
{
if ( this->array_of_IPCams[index]->field_20 )
do_PostMessageA((CViewer *)this->array_of_IPCams[index], 0x111u, 0x139Fu, v11);
}
return (*(int (__thiscall **)(CCriticalSection *))(this->crit_sections[index].vtbl + 20))(&this->crit_sections[index]); //[3]
}
} |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### setPIP command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### setStream command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### connectInfo command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### snapshot command index-out-of-bound |
| DVP80ES300T with Improper Validation of Array Index Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
netlabel: validate unlabeled address and mask attribute lengths
netlbl_unlabel_addrinfo_get() used the address attribute length to
determine whether the attribute data could be read as an IPv4 or IPv6
address, but did not independently validate the corresponding mask
attribute length. A crafted Generic Netlink request could therefore
provide a valid IPv4/IPv6 address attribute with a shorter mask
attribute, which would later be read as a full struct in_addr or
struct in6_addr.
NLA_BINARY policy lengths are maximum lengths by default, so use
NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask
attributes. This rejects short attributes during policy validation and
also exposes the exact length requirements through policy introspection. |
| vtk vtk-dicom vtkDICOMItem::NewDataElement heap-based buffer overflow vulnerability |
| libais through 0.15 VdmStream::AddLine uses an unchecked sentinel value as a vector index when processing AIS sentences with empty or out-of-range sequential message IDs. Remote attackers can crash services or vessel systems by sending crafted AIVDM sentences over VHF marine radio or IP feeds, causing out-of-bounds memory access and potential corruption. |
| Backpropagate is a Python library for fine-tuning large language models on a single GPU. In versions 1.1.0 and 1.1.1, the optional Reflex web UI exposes a training control plane without authentication: dataset upload, model load, training start/stop, multi-run orchestration, GGUF export, and HuggingFace Hub push. The CLI accepts two operator-facing flags intended as security controls: --auth user:pass — documented as "require HTTP Basic authentication on every request to the UI." and--share — documented as "expose the UI on a public address; requires --auth." When --auth user:pass is passed, the CLI prints Auth: enabled (user: <username>) to confirm to the operator that authentication is active, then exports BACKPROPAGATE_UI_AUTH=user:pass to the subprocess that launches the Reflex backend. The Reflex backend (backpropagate/ui_app/**) never reads BACKPROPAGATE_UI_AUTH. No authentication middleware is registered. No request-level guard runs. No WebSocket upgrade guard runs. Any client that reaches the bound port — local or remote, depending on whether --share is used — has full UI access. An inline comment at backpropagate/cli.py:1217-1218 in the v1.1.0 source documents the gap: "For Phase 1 the variable is exported but Reflex doesn't read it yet." This comment was internal-facing; the user-facing documentation (README, CHANGELOG, SHIP_GATE) advertised the contract as enforced. An attacker who reaches the bound port can read uploaded datasets, trigger arbitrary training runs against any local base models as well as read their paths, trigger HuggingFace Hub pushes and cause disk-fill DoS. This issue has been fixed in version 1.2.0. If developers cannot immediately upgrade to 1.2.0 run backprop ui with no flags so it binds to localhost, use SSH port-forwarding (ssh -L 7860:localhost:7860 <training-host>) instead of --share for remote access, and audit any host previously launched with --share, re-issuing any HF tokens used during those sessions. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add spectre boundry for syscall dispatch table
The LoongArch syscall number is directly controlled by userspace, but
does not have a array_index_nospec() boundry to prevent access past the
syscall function pointer tables. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/crypto: mpi: Fix integer underflow in mpi_read_raw_from_sgl()
Yiming reports an integer underflow in mpi_read_raw_from_sgl() when
subtracting "lzeros" from the unsigned "nbytes".
For this to happen, the scatterlist "sgl" needs to occupy more bytes
than the "nbytes" parameter and the first "nbytes + 1" bytes of the
scatterlist must be zero. Under these conditions, the while loop
iterating over the scatterlist will count more zeroes than "nbytes",
subtract the number of zeroes from "nbytes" and cause the underflow.
When commit 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers") originally
introduced the bug, it couldn't be triggered because all callers of
mpi_read_raw_from_sgl() passed a scatterlist whose length was equal to
"nbytes".
However since commit 63ba4d67594a ("KEYS: asymmetric: Use new crypto
interface without scatterlists"), the underflow can now actually be
triggered. When invoking a KEYCTL_PKEY_ENCRYPT system call with a
larger "out_len" than "in_len" and filling the "in" buffer with zeroes,
crypto_akcipher_sync_prep() will create an all-zero scatterlist used for
both the "src" and "dst" member of struct akcipher_request and thereby
fulfil the conditions to trigger the bug:
sys_keyctl()
keyctl_pkey_e_d_s()
asymmetric_key_eds_op()
software_key_eds_op()
crypto_akcipher_sync_encrypt()
crypto_akcipher_sync_prep()
crypto_akcipher_encrypt()
rsa_enc()
mpi_read_raw_from_sgl()
To the user this will be visible as a DoS as the kernel spins forever,
causing soft lockup splats as a side effect.
Fix it. |
| When NGINX Gateway Fabric is configured using GRPCRoutes, an authenticated, remote attacker with permission to create or modify GRPCRoute resources can cause the NGINX Gateway Fabric control plane to terminate by sending undisclosed GRPCRoute configurations containing backendRef filters.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, when performing a polynomial distortion an out of bounds over-read of 24 bytes can occur when specifying specific arguments. This issue has been patched in versions 6.9.13-47 and 7.1.2-22. |
