| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in Cisco Catalyst SD-WAN Software could allow an unauthenticated, remote attacker to view sensitive information on an affected system.
This vulnerability is due to insufficient file system restrictions. An authenticated attacker with netadmin privileges could exploit this vulnerability by accessing the vshell of an affected system. A successful exploit could allow the attacker to read sensitive information on the underlying operating system. |
| A vulnerability in Cisco ISE and ISE-PIC could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. |
| A vulnerability in Cisco ISE and ISE-PIC could allow an unauthenticated, remote attacker to view sensitive information on an affected device.
This vulnerability is due to improper authorization checks when a resource is accessed. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to sensitive information, including hashed credentials that could be used in future attacks. |
| A vulnerability in the web-based management interface of Cisco Crosswork Network Controller could allow an authenticated, remote attacker to execute arbitrary commands on an affected device.
This vulnerability is due to insufficient input validation in the configuration template engine of the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system in limited areas of the file system. This vulnerability affects only areas of the operating system for which the template user has write permissions.
To exploit this vulnerability, the attacker must have valid template user credentials with write permissions. Template users with read permissions cannot exploit this vulnerability. |
| A vulnerability in the vmadmin CLI of Cisco Umbrella Virtual Appliance could allow an authenticated, local attacker to elevate privileges on an affected device.
This vulnerability is due to insufficient validation of user-supplied commands. An attacker with vmadmin privileges could exploit this vulnerability by using certain commands at the CLI. A successful exploit could allow the attacker to elevate privileges to root. |
| A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system.
This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to an affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric. |
| May 2026: This security advisory provides the details and fix information for a vulnerability that was discovered and fixed after the was disclosed in February 2026. This new advisory is for a new vulnerability in the control connection handshaking. The section of this advisory includes Show Control Connections guidance to help with system checks.
A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system.
This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to the affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric. |
| A vulnerability in the web UI of Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, could allow an authenticated, remote attacker to create a file or overwrite any file on the filesystem of an affected system.
This vulnerability exists because the affected software does not properly validate user-supplied input during a file upload process. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected API endpoint of the affected system. A successful exploit could allow the attacker to create or overwrite any file on the underlying operating system. This file could later be used to elevate to root. To exploit this vulnerability, the attacker must have valid credentials with at least a lower-privileged, single-task user account. |
| A vulnerability in the web-based user interface of Cisco Webex Meetings could have allowed an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack. Cisco has addressed this vulnerability in the Webex Meetings service, and no customer action is needed.
This vulnerability existed because of insufficient validation of user input. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by persuading a user to follow a malicious link. A successful exploit could have allowed the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information. |
| A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an authenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To exploit this vulnerability, the attacker must have the OSPF secret key.
This vulnerability is due to insufficient input validation when processing OSPF link-state update (LSU) packets. An attacker could exploit this vulnerability by sending crafted OSPF LSU packets. A successful exploit could allow the attacker to corrupt the heap, causing the device to reload, resulting in a DoS condition. |
| A vulnerability in the Cisco FXOS Software CLI feature for Cisco Secure Firewall ASA Software and Secure FTD Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system with root-level privileges. To exploit this vulnerability, the attacker must have valid administrative credentials on an affected device.
This vulnerability is due to insufficient input validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input for specific CLI commands. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. |
| A vulnerability in Cisco Finesse could allow an unauthenticated, remote attacker to load arbitrary files from remote locations into an active user session on an affected device, possibly leading to browser-based attacks.
This vulnerability is due to insufficient validation of user-supplied input for HTTP requests that are sent to an affected device. An attacker who has knowledge of the address of the affected device could exploit this vulnerability by persuading a user to click a crafted link that contains the affected device address. A successful exploit could allow the attacker to conduct browser-based attacks and execute arbitrary script code in the context of the affected interface or access sensitive information on the affected device. |
| A vulnerability in the VPN web services component of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct browser-based attacks against users of an affected device.
This vulnerability is due to improper validation of HTTP requests. An attacker could exploit this vulnerability by persuading a user to visit a website that is designed to pass malicious HTTP requests to a device that is running Cisco Secure Firewall ASA Software or Cisco Secure FTD Software and has web services endpoints supporting VPN features enabled. A successful exploit could allow the attacker to reflect malicious input from the affected device to the browser that is in use and conduct browser-based attacks, including cross-site scripting (XSS) attacks. The attacker is not able to directly impact the affected device. |
| The DES and Triple DES ciphers, as used in the TLS, SSH, and IPSec protocols and other protocols and products, have a birthday bound of approximately four billion blocks, which makes it easier for remote attackers to obtain cleartext data via a birthday attack against a long-duration encrypted session, as demonstrated by an HTTPS session using Triple DES in CBC mode, aka a "Sweet32" attack. |
| Apache Log4j2 versions 2.0-beta7 through 2.17.0 (excluding security fix releases 2.3.2 and 2.12.4) are vulnerable to a remote code execution (RCE) attack when a configuration uses a JDBC Appender with a JNDI LDAP data source URI when an attacker has control of the target LDAP server. This issue is fixed by limiting JNDI data source names to the java protocol in Log4j2 versions 2.17.1, 2.12.4, and 2.3.2. |
| ICMP information such as (1) netmask and (2) timestamp is allowed from arbitrary hosts. |
| A vulnerability in the BrowserBot component of Cisco ThousandEyes Enterprise Agent could have allowed an authenticated, remote attacker to execute arbitrary commands on Agents on behalf of the BrowserBot synthetics orchestration process. Cisco has addressed this vulnerability in the Cisco ThousandEyes Enterprise Agent, and no customer action is needed.
This vulnerability was due to insufficient input validation of command arguments that are supplied by the user. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by authenticating to the ThousandEyes SaaS and submitting crafted input into the affected parameter. A successful exploit could have allowed the attacker to execute arbitrary commands within the BrowserBot container as the node user.
To exploit this vulnerability, the attacker must have valid user credentials for the ThousandEyes SaaS and the ability to manage transaction tests. |
| A vulnerability in the access validation of internal REST APIs of Cisco Secure Workload could allow an unauthenticated, remote attacker to access site resources with the privileges of the Site Admin role.
This vulnerability is due to insufficient validation and authentication when accessing REST API endpoints. An attacker could exploit this vulnerability if they are able to send a crafted API request to an affected endpoint. A successful exploit could allow the attacker to read sensitive information and make configuration changes across tenant boundaries with the privileges of the Site Admin user. |
| A vulnerability in the Border Gateway Protocol (BGP) enforce-first-as feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, remote attacker to trigger BGP peer flaps, resulting in a denial of service (DoS) condition.
This vulnerability is due to incorrect parsing of a transitive BGP attribute. An attacker could exploit this vulnerability by sending a crafted BGP update through an established BGP peer session. If the update propagates to an affected device, it could cause the device to drop the BGP session and flap with the BGP peer that is forwarding this update, resulting in a DoS condition. |
| A vulnerability in the SSL certificate handling of Cisco ThousandEyes Virtual Appliance could allow an authenticated, remote attacker to execute commands on the underlying operating system as the root user.
This vulnerability is due to insufficient validation of user-supplied input. An authenticated attacker could exploit this vulnerability by uploading a crafted certificate to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit this vulnerability, the attacker must have valid administrative credentials. |
