| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| re2 provides Node.js bindings for Google's RE2 regular expression engine. Prior to 1.25.2, re2's String.prototype.match implementation with a global RE2 pattern that can match the empty string fails to advance its native matching cursor in lib/match.cc, causing an infinite loop and unbounded native memory growth that blocks the event loop and can exhaust host memory. This issue is fixed in 1.25.2. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
Savino says:
"We are writing to report that this recent patch
(141d34391abbb315d68556b7c67ad97885407547) [1]
can be bypassed, and a UAF can still occur when HFSC is utilized with
NETEM.
The patch only checks the cl->cl_nactive field to determine whether
it is the first insertion or not [2], but this field is only
incremented by init_vf [3].
By using HFSC_RSC (which uses init_ed) [4], it is possible to bypass the
check and insert the class twice in the eltree.
Under normal conditions, this would lead to an infinite loop in
hfsc_dequeue for the reasons we already explained in this report [5].
However, if TBF is added as root qdisc and it is configured with a
very low rate,
it can be utilized to prevent packets from being dequeued.
This behavior can be exploited to perform subsequent insertions in the
HFSC eltree and cause a UAF."
To fix both the UAF and the infinite loop, with netem as an hfsc child,
check explicitly in hfsc_enqueue whether the class is already in the eltree
whenever the HFSC_RSC flag is set.
[1] https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=141d34391abbb315d68556b7c67ad97885407547
[2] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1572
[3] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L677
[4] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1574
[5] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: Prevent creation of classes with TC_H_ROOT
The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination
condition when traversing up the qdisc tree to update parent backlog
counters. However, if a class is created with classid TC_H_ROOT, the
traversal terminates prematurely at this class instead of reaching the
actual root qdisc, causing parent statistics to be incorrectly maintained.
In case of DRR, this could lead to a crash as reported by Mingi Cho.
Prevent the creation of any Qdisc class with classid TC_H_ROOT
(0xFFFFFFFF) across all qdisc types, as suggested by Jamal. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: Fix crash when a namespace is disabled
The namespace percpu counter protects pending I/O, and we can
only safely diable the namespace once the counter drop to zero.
Otherwise we end up with a crash when running blktests/nvme/058
(eg for loop transport):
[ 2352.930426] [ T53909] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI
[ 2352.930431] [ T53909] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 2352.930434] [ T53909] CPU: 3 UID: 0 PID: 53909 Comm: kworker/u16:5 Tainted: G W 6.13.0-rc6 #232
[ 2352.930438] [ T53909] Tainted: [W]=WARN
[ 2352.930440] [ T53909] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[ 2352.930443] [ T53909] Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop]
[ 2352.930449] [ T53909] RIP: 0010:blkcg_set_ioprio+0x44/0x180
as the queue is already torn down when calling submit_bio();
So we need to init the percpu counter in nvmet_ns_enable(), and
wait for it to drop to zero in nvmet_ns_disable() to avoid having
I/O pending after the namespace has been disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc
vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time,
looping to skip optional states the device does not support until
*next_fsm is supported. A blocked transition is encoded as
VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL.
The skip loop does not account for the ERROR sentinel.
state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is
ERROR, so once *next_fsm becomes ERROR the loop condition stays true and
*next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and
STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a
precopy-capable device, causing the loop to spin forever while holding
the driver state mutex. This can result in a soft lockup, and a panic
with softlockup_panic set.
Terminate the skip loop on the ERROR sentinel so a blocked transition
falls through to the existing return and reports -EINVAL. |
| Netty is an asynchronous, event-driven network application framework. Prior to versions 4.1.136.Final and 4.2.16.Final, the `Bzip2Decoder` handler in Netty's compression codec pipeline is vulnerable to a denial-of-service attack through a malformed bzip2 stream that permanently captures the event-loop thread in an infinite loop. The vulnerability exists in the run-length encoding (RLE) state machine within [`Bzip2BlockDecompressor.read()`]. This issue has been fixed in versions 4.1.136.Final and 4.2.16.Final. |
| A flaw was found in dhcpcd's IPv6 Neighbor Discovery Router Advertisement processing. A specially crafted IPv6 Router Advertisement containing a zero-length Neighbor Discovery option can bypass validation during packet storage and later be reparsed without adequate validation, causing the parser to enter a non-advancing loop. Successful exploitation may result in excessive CPU consumption, leading to a denial of service. |
| nanoid (Nano ID) before 5.1.6 contains an infinite loop in the customAlphabet and customRandom functions. When these functions are configured with a size of 0, the internal generation loop never satisfies its exit condition and spins indefinitely, hanging the calling thread. An application that passes an unvalidated, attacker-controlled size of 0 to these functions is exposed to a denial-of-service condition. |
| nanoid (Nano ID) before 5.1.16 contains an infinite loop in the customAlphabet and nanoid functions of its non-secure module (nanoid/non-secure). When these functions are given a negative size, the loop counter is decremented from a negative value and never reaches its termination condition, spinning indefinitely and hanging the calling thread. An application that passes an unvalidated, attacker-controlled negative size to these functions is exposed to a denial-of-service condition. |
| In Roundcube Webmail before 1.6.17 and 1.7.x before 1.7.2, an infinite loop was discovered in the TNEF decoder, which may lead to denial of service upon opening an email with a TNEF attachment. |
| PhpSpreadsheet is a pure PHP library for reading and writing spreadsheet files. In versions 4.0.0 through 5.8.0, 3.3.0 through 3.10.6, 2.2.0 through 2.4.6, 2.0.0 through 2.1.17, and all releases up to and including 1.30.5, the OLE reader follows sector chains from attacker-controlled XLS/OLE metadata without detecting cycles or enforcing a maximum chain length. A tiny malformed .xls/OLE file can set the small-block depot sector chain to point back to itself. During normal XLS detection, OLERead::read() appends the same sector data repeatedly until the PHP process exhausts memory. This is reachable from Reader\Xls::canRead() and therefore from automatic spreadsheet type detection. Applications that accept attacker-controlled spreadsheet uploads can suffer denial of service from a very small file. This issue has been fixed in versions 5.8.1, 3.10.7, 2.4.7, 2.1.18 and 1.30.6. |
| fflate through 0.8.2 is vulnerable to denial of service via an infinite loop in unzipSync(). A crafted ZIP archive with a central directory entry declaring compressed_size=0xFFFFFFFF (ZIP64 sentinel) but missing the required ZIP64 extra field tag 0x0001 causes z64e() to loop indefinitely due to out-of-bounds reads returning undefined, which coerces to 0, keeping the loop condition permanently true. |
| Astro is a web framework for content-driven websites. In versions 3.10.0 through 7.0.3, when a transition:persist, transition:scope, or transition:persist-props directive is applied to a client-hydrated (client:*) component, Astro copied the directive value onto the rendered <astro-island> element without HTML-escaping it. If a developer reflects attacker-controlled input into one of these directives, an attacker can break out of the attribute and inject arbitrary HTML/JavaScript into the server-rendered output, resulting in reflected cross-site scripting (XSS). Exploitation requires the application developer to have written a non-idiomatic pattern — passing untrusted, request-derived input directly into a transition directive. Astro applications that do not route untrusted input into these directives are unaffected. This issue has been fixed in version 7.0.4. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: reject invalid CCM interval at configuration time
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink policy so userspace cannot set an invalid value.
- Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has
not yet been configured (defaults to 0 from kzalloc). |
| In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw->state != CMD_SEND, and dw->state is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code.
As a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target.
An I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral.
The fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked. |
| Next.js is a React framework for building full-stack web applications. In versions 13.0.0 through 15.5.20 and 16.0.0 through 16.2.10, crafted requests targeting Next.js applications using App Router with at least one Server Action can lead to excessive CPU usage blocking processing of further requests in the same process. This issue has been fixed in versions 15.5.21 and 16.2.11. |
| SurrealDB before 2.0.5, 2.1.x before 2.1.5, and 2.2.x before 2.2.2 allows authenticated users with OWNER or EDITOR permissions (at the root, namespace, or database level) to define custom database functions via DEFINE FUNCTION using nested FOR loops. Although a single loop's iteration count is constrained, nesting multiple loops (e.g., each with 1,000,000 iterations) is not, so an attacker can execute a function that consumes all server CPU time. Configured timeouts do not stop the execution, rendering the server unresponsive to other queries and connections until it is manually restarted. |
| FFmpeg versions 0.6.3 through 8.1.2 contain an infinite loop vulnerability in the RTP/ASF demuxer within libavformat/rtpdec_asf.c that allows remote attackers to cause denial of service by sending a crafted RTP/ASF stream. The rtp_asf_fix_header function fails to validate a minimum chunksize when iterating over ASF objects, causing the loop pointer to never advance when a chunksize is smaller than the 24-byte minimum ASF object header size, resulting in CPU exhaustion that denies service to legitimate users. |
| Zeroconf is a pure Python implementation of multicast DNS service discovery. Prior to 0.149.5, DNSIncoming._decode_labels_at_offset recurses once per DNS-name compression pointer, and a single mDNS packet carrying chained pointers can trigger a RecursionError that escapes DNSIncoming.__init__, causing sustained CPU burn, log flooding, and degraded mDNS-dependent features for unauthenticated hosts on the local link over UDP/5353 (224.0.0.251 / ff02::fb). This issue is fixed in version 0.149.5. |
| A flaw was found in libssh. Logic errors in automatic certificate-based public key authentication can cause libssh clients to loop indefinitely when configured certificates are missing or repeatedly rejected by a server, leading to denial of service. |
